Namespace the p001 steps

main/drivers/CMakeLists.txt

@@ -11,11 +11,12 @@ set(SOURCES
     "i2c_lcd_pcf8574.c"
     "i2c.cpp"
     "leds.cpp"
+    "perh.cpp"
     "power.cpp"
     "sd.cpp"
     "speaker.cpp"
     "sseg.cpp"
-    "star_code.cpp"
+    "starcode.cpp"
     "state_tracking.cpp"
     "tft.cpp"
     "wires.cpp"

main/drivers/SparkFunBQ27441/SparkFunBQ27441.cpp

@@ -711,9 +711,9 @@ bool BQ27441::writeExtendedData(uint8_t classID, uint8_t offset, uint8_t * data,
 int16_t BQ27441::i2cReadBytes(uint8_t subAddress, uint8_t * dest, uint8_t count)
 {
 	int16_t timeout = BQ72441_I2C_TIMEOUT;
-	xSemaphoreTake(i2c0_mutex, portMAX_DELAY);
+	xSemaphoreTake(main_i2c_mutex, portMAX_DELAY);
 	i2c_master_write_read_device(BQ72441_I2C_NUM, _deviceAddress, &subAddress, 1, dest, count, timeout);
-	xSemaphoreGive(i2c0_mutex);
+	xSemaphoreGive(main_i2c_mutex);
 	return timeout;
 }
 

main/drivers/all.h

@@ -10,7 +10,7 @@
 #include "sd.h"
 #include "speaker.h"
 #include "sseg.h"
-#include "star_code.h"
+#include "starcode.h"
 #include "state_tracking.h"
 #include "tft.h"
 #include "wires.h"

main/drivers/bottom_half.cpp

@@ -1,7 +1,7 @@
 #include "bottom_half.h"
 #include <esp_log.h>
 #include "state_tracking.h"
-#include "star_code.h"
+#include "starcode.h"
 
 static const char *TAG = "bottom_half";
 
@@ -46,8 +46,14 @@ static bool replay_handler(const char* event, char* arg) {
 void init_bottom_half() {
     ESP_LOGI(TAG, "Initializing bottom half...");
 
-    ESP_ERROR_CHECK(gpio_set_direction(BOTTOM_PIN_INTERUPT, GPIO_MODE_INPUT));
-    ESP_ERROR_CHECK(gpio_set_pull_mode(BOTTOM_PIN_INTERUPT, GPIO_PULLUP_ONLY));
+    gpio_config_t int_conf = {
+        .pin_bit_mask = 1ULL << BOTTOM_PIN_INTERUPT,
+        .mode = GPIO_MODE_INPUT,
+        .pull_up_en = GPIO_PULLUP_ENABLE,
+        .pull_down_en = GPIO_PULLDOWN_DISABLE,
+        .intr_type = GPIO_INTR_DISABLE,
+    };
+    ESP_ERROR_CHECK(gpio_config(&int_conf));
 
     // TODO: do interupt stuff.
     // ESP_ERROR_CHECK(gpio_intr_enable(BOTTOM_PIN_INTERUPT));

main/drivers/bottom_half.h

@@ -6,7 +6,7 @@
 
 #define BOTTOM_I2C_NUM I2C_NUM_0
 #define BOTTOM_I2C_ADDR 126
-#define BOTTOM_PIN_INTERUPT GPIO_NUM_0
+#define BOTTOM_PIN_INTERUPT GPIO_NUM_13
 
 #define DELTA_BIT_KP 0
 #define DELTA_BIT_BUTTON_SWITCH 1
@@ -14,22 +14,22 @@
 
 /// @brief An enum for the possible keypad buttons.
 typedef enum {
-    k1 = 0,
-    k4 = 1,
-    k7 = 2,
+    kd = 0,
+    pound = 1,
+    k0 = 2,
     star = 3,
-    k2 = 4,
-    k5 = 5,
+    kc = 4,
+    k9 = 5,
     k8 = 6,
-    k0 = 7,
-    k3 = 8,
+    k7 = 7,
+    kb = 8,
     k6 = 9,
-    k9 = 10,
-    pound = 11,
+    k5 = 10,
+    k4 = 11,
     ka = 12,
-    kb = 13,
-    kc = 14,
-    kd = 15,
+    k3 = 13,
+    k2 = 14,
+    k1 = 15,
 } KeypadKey;
 
 /// @brief An enum for the possible buttons.

main/drivers/char_lcd.cpp

@@ -5,6 +5,8 @@
 #include "state_tracking.h"
 #include <cstring>
 #include "power.h"
+#include "starcode.h"
+#include "game_info.h"
 
 i2c_lcd_pcf8574_handle_t lcd;
 

main/drivers/char_lcd.h

@@ -66,15 +66,6 @@ bool lcd_header_enabled();
 /// @brief Prints the header in the LCD.
 void lcd_print_header();
 
-/// @brief Prints the star code section of the LCD header.
-void lcd_print_header_star_code();
-
-/// @brief Prints the step section of the LCD header.
-void lcd_print_header_step();
-
-/// @brief Prints the battery section of the LCD header.
-void lcd_print_header_bat();
-
 /// @brief Prints the splash screen for the BLK_BOX.
 void lcd_do_splash();
 

main/drivers/game_info.cpp

@@ -1,23 +1,21 @@
 #include "game_info.h"
+#include "starcode.h"
 #include <stdio.h>
 #include "char_lcd.h"
 
-// static char game_state[GAME_STATE_MAX_LEN+1] = "     ";
-static char game_state[GAME_STATE_MAX_LEN+1] = "MENU ";
+static char game_state[GAME_STATE_MAX_LEN+2] = " MENU ";
 
-void set_game_state(char* new_state) {
-    snprintf(game_state, sizeof(game_state), "%-5s", new_state);
+void set_game_state(const char* new_state) {
+    snprintf(game_state, sizeof(game_state), " %-5s", new_state);
 }
 
 void reset_game_state() {
-    for (int i = 0; i < GAME_STATE_MAX_LEN; i++) {
-        game_state[i] = '\0';
-    }
-    game_state[GAME_STATE_MAX_LEN] = '\0';
+    set_game_state("");
 }
 
 void lcd_print_header_step() {
     if (!lcd_header_enabled()) return;
+    if (lcd_starcode_displaying_result()) return;
 
     lcd_print(10, 0, game_state);
 }

main/drivers/game_info.h

@@ -6,12 +6,12 @@
 /// @brief Sets the game state, used for the header.
 ///
 /// Must be <= 5 characters
-void set_game_state(char* new_state);
+void set_game_state(const char* new_state);
 
 /// @brief Resets the game state to be blank.
 void reset_game_state();
 
-/// @brief Prints the game state section of the header to the char_lcd. (row 0, columns 10-14)
+/// @brief Prints the game state section of the header to the char_lcd. (row 0, columns 11-15)
 void lcd_print_header_step();
 
 #endif /* GAME_INFO_H */

main/drivers/i2c.cpp

@@ -5,30 +5,31 @@
 
 static const char *TAG = "i2c";
 
-SemaphoreHandle_t i2c0_mutex;
+SemaphoreHandle_t main_i2c_mutex;
 
 void init_i2c() {
     ESP_LOGI(TAG, "Initializing i2c...");
 
     i2c_config_t conf = {
         .mode = I2C_MODE_MASTER,
-        .sda_io_num = GPIO_NUM_5,
-        .scl_io_num = GPIO_NUM_6,
+        .sda_io_num = PIN_I2C_SDA,
+        .scl_io_num = PIN_I2C_SCL,
         .sda_pullup_en = GPIO_PULLUP_DISABLE,
         .scl_pullup_en = GPIO_PULLUP_DISABLE,
         // .sda_pullup_en = GPIO_PULLUP_ENABLE,
         // .scl_pullup_en = GPIO_PULLUP_ENABLE,
         .master = {
+            // TODO: 400k?
             .clk_speed = 100*1000,
         },
         .clk_flags = I2C_SCLK_SRC_FLAG_FOR_NOMAL
     };
 
-    ESP_ERROR_CHECK(i2c_param_config(I2C_NUM_0, &conf));
-    ESP_ERROR_CHECK(i2c_driver_install(I2C_NUM_0, conf.mode, 0, 0, 0));
+    ESP_ERROR_CHECK(i2c_param_config(MAIN_I2C_BUS_NUM, &conf));
+    ESP_ERROR_CHECK(i2c_driver_install(MAIN_I2C_BUS_NUM, conf.mode, 0, 0, 0));
 
-    i2c0_mutex = xSemaphoreCreateMutex();
-    assert(i2c0_mutex != NULL);
+    main_i2c_mutex = xSemaphoreCreateMutex();
+    assert(main_i2c_mutex != NULL);
 
     ESP_LOGI(TAG, "i2c initialized!");
 }

main/drivers/i2c.h

@@ -4,8 +4,13 @@
 #include "freertos/FreeRTOS.h"
 #include "freertos/semphr.h"
 
+#define MAIN_I2C_BUS_NUM I2C_NUM_0
+
+#define PIN_I2C_SDA GPIO_NUM_7
+#define PIN_I2C_SCL GPIO_NUM_15
+
 /// The mutex for accessing `I2C_NUM_0`.
-extern SemaphoreHandle_t i2c0_mutex;
+extern SemaphoreHandle_t main_i2c_mutex;
 
 /// @brief Initializes `I2C_NUM_0`.
 ///

main/drivers/i2c_lcd_pcf8574.c

@@ -59,7 +59,7 @@ void lcd_begin(i2c_lcd_pcf8574_handle_t* lcd, uint8_t cols, uint8_t rows) {
     lcd->entrymode = 0x02;
 
     // The following are the reset sequence: Please see "Initialization instruction in the PCF8574 datasheet."
-    xSemaphoreTake(i2c0_mutex, portMAX_DELAY);
+    xSemaphoreTake(main_i2c_mutex, portMAX_DELAY);
     i2c_cmd_handle_t cmd = i2c_cmd_link_create();
     i2c_master_start(cmd);
     // We left-shift the device addres and add the read/write command
@@ -97,7 +97,7 @@ void lcd_begin(i2c_lcd_pcf8574_handle_t* lcd, uint8_t cols, uint8_t rows) {
     i2c_master_stop(cmd);
     i2c_master_cmd_begin(lcd->i2c_port, cmd, I2C_MASTER_TIMEOUT_MS / portTICK_PERIOD_MS);
     i2c_cmd_link_delete(cmd);
-    xSemaphoreGive(i2c0_mutex);
+    xSemaphoreGive(main_i2c_mutex);
 
     // Instruction: function set = 0x20
     lcd_send(lcd, 0x20 | (rows > 1 ? 0x08 : 0x00), false);
@@ -298,7 +298,7 @@ void lcd_print_number(i2c_lcd_pcf8574_handle_t* lcd, uint8_t col, uint8_t row, u
 
 
 static void lcd_send(i2c_lcd_pcf8574_handle_t* lcd, uint8_t value, bool is_data) {
-    xSemaphoreTake(i2c0_mutex, portMAX_DELAY);
+    xSemaphoreTake(main_i2c_mutex, portMAX_DELAY);
     i2c_cmd_handle_t cmd = i2c_cmd_link_create();
     i2c_master_start(cmd);
     i2c_master_write_byte(cmd, (lcd->i2c_addr << 1) | I2C_MASTER_WRITE, true);
@@ -307,7 +307,7 @@ static void lcd_send(i2c_lcd_pcf8574_handle_t* lcd, uint8_t value, bool is_data)
     i2c_master_stop(cmd);
     esp_err_t ret = i2c_master_cmd_begin(lcd->i2c_port, cmd, I2C_MASTER_TIMEOUT_MS / portTICK_PERIOD_MS);
     i2c_cmd_link_delete(cmd);
-    xSemaphoreGive(i2c0_mutex);
+    xSemaphoreGive(main_i2c_mutex);
     
     if (ret != ESP_OK) {
         ESP_LOGE(TAG, "Failed to send data to LCD: %s", esp_err_to_name(ret));
@@ -346,7 +346,7 @@ static void lcd_write_i2c(i2c_lcd_pcf8574_handle_t* lcd, uint8_t data, bool is_d
         data |= lcd->backlight_mask;
     }
 
-    xSemaphoreTake(i2c0_mutex, portMAX_DELAY);
+    xSemaphoreTake(main_i2c_mutex, portMAX_DELAY);
     i2c_cmd_handle_t cmd = i2c_cmd_link_create();
     i2c_master_start(cmd);
     i2c_master_write_byte(cmd, (lcd->i2c_addr << 1) | I2C_MASTER_WRITE, true);
@@ -354,7 +354,7 @@ static void lcd_write_i2c(i2c_lcd_pcf8574_handle_t* lcd, uint8_t data, bool is_d
     i2c_master_stop(cmd);
     esp_err_t ret = i2c_master_cmd_begin(lcd->i2c_port, cmd, I2C_MASTER_TIMEOUT_MS / portTICK_PERIOD_MS);
     i2c_cmd_link_delete(cmd);
-    xSemaphoreGive(i2c0_mutex);
+    xSemaphoreGive(main_i2c_mutex);
 
     if (ret != ESP_OK) {
         ESP_LOGE(TAG, "Failed to write to LCD: %s", esp_err_to_name(ret));

main/drivers/leds.h

@@ -4,7 +4,7 @@
 #include <stdint.h>
 
 #define LED_COUNT 21
-#define NEOPIXEL_PIN GPIO_NUM_7
+#define NEOPIXEL_PIN GPIO_NUM_0
 // 10MHz resolution, 1 tick = 0.1us (led strip needs a high resolution)
 #define LED_STRIP_RMT_RES_HZ  (10 * 1000 * 1000)
 

main/drivers/perh.cpp

@@ -0,0 +1,2 @@
+#include "perh.h"
+

main/drivers/perh.h

@@ -0,0 +1,12 @@
+#ifndef PERH_H
+#define PERH_H
+
+#include "driver/gpio.h"
+
+#define PIN_PERH0 GPIO_NUM_6
+#define PIN_PERH1 GPIO_NUM_5
+#define PIN_PERH2 GPIO_NUM_4
+#define PIN_PERH3 GPIO_NUM_2
+#define PIN_PERH4 GPIO_NUM_1
+
+#endif /* PERH_H */

main/drivers/power.cpp

@@ -1,5 +1,6 @@
 #include "power.h"
 #include "char_lcd.h"
+#include "starcode.h"
 #include <esp_log.h>
 
 static const char* TAG = "power";
@@ -56,17 +57,21 @@ uint16_t get_bat_voltage() {
 
 void lcd_print_header_bat() {
     if (!lcd_header_enabled()) return;
+    if (lcd_starcode_displaying_result()) return;
     
     uint8_t soc = lipo.soc();
-    char buf[5];
-    if (soc < 5) {
-        sprintf(buf, "LOW ");
+    uint8_t current = lipo.current();
+    char buf[6];
+    if (soc < 5 && current <= 0) {
+        snprintf(buf, sizeof(buf), " LOW");
+    } else if (soc == 100) {
+        snprintf(buf, sizeof(buf), " 100");
     } else {
-        snprintf(buf, sizeof(buf), "%3d%%", soc);
+        if (current > 0) {
+            snprintf(buf, sizeof(buf), " %2d+", soc);
+        } else {
+            snprintf(buf, sizeof(buf), " %2d%%", soc);
         }
-
-    if (lipo.current() > 0) {
-        buf[3] = '+';
     }
 
     lcd_print(16, 0, buf);

main/drivers/power.h

@@ -14,7 +14,7 @@ void init_power_board();
 /// @return battery voltage in mV.
 uint16_t get_bat_voltage();
 
-/// @brief Prints the battery section of the header to the char_lcd. (row 0, columns 16-19)
+/// @brief Prints the battery section of the header to the char_lcd. (row 0, columns 17-19)
 void lcd_print_header_bat();
 
 #endif /* POWER_H */

main/drivers/sd.h

@@ -12,12 +12,12 @@
 
 extern sdmmc_card_t *card;
 
-#define SD_PIN_CLK GPIO_NUM_48
-#define SD_PIN_CMD GPIO_NUM_45
-#define SD_PIN_D0  GPIO_NUM_47
-#define SD_PIN_D1  GPIO_NUM_21
-#define SD_PIN_D2  GPIO_NUM_39
-#define SD_PIN_D3  GPIO_NUM_38
+#define SD_PIN_CLK GPIO_NUM_39
+#define SD_PIN_CMD GPIO_NUM_40
+#define SD_PIN_D0  GPIO_NUM_38
+#define SD_PIN_D1  GPIO_NUM_45
+#define SD_PIN_D2  GPIO_NUM_42
+#define SD_PIN_D3  GPIO_NUM_41
 
 /// @brief Initializes the SD card
 ///

main/drivers/speaker.h

@@ -15,8 +15,8 @@
 #include "sdkconfig.h"
 #include "sd.h"
 
-#define SPEAKER_PIN_BCLK  GPIO_NUM_46
-#define SPEAKER_PIN_WS    GPIO_NUM_9
+#define SPEAKER_PIN_BCLK  GPIO_NUM_11
+#define SPEAKER_PIN_WS    GPIO_NUM_12
 #define SPEAKER_PIN_DOUT  GPIO_NUM_3
 #define SAMPLE_RATE 44100
 // The maximum number of clips that can be queued at one time.

main/drivers/sseg.h

@@ -4,8 +4,8 @@
 #include "TM1640/TM1640.h"
 #include <esp_log.h>
 
-#define SSEG_PIN_DATA GPIO_NUM_10
-#define SSEG_PIN_CLK  GPIO_NUM_11
+#define SSEG_PIN_DATA GPIO_NUM_46
+#define SSEG_PIN_CLK  GPIO_NUM_48
 
 extern TM1640* sseg;
 

main/drivers/starcode.cpp

@@ -1,4 +1,4 @@
-#include "star_code.h"
+#include "starcode.h"
 #include <vector>
 #include <algorithm>
 #include <string.h>
@@ -20,8 +20,10 @@ static std::vector<StarCodeEntry> star_codes;
 static const char EMPTY_STAR_CODE_HEADER[] = "          ";
 
 esp_timer_handle_t starcode_delay_timer;
-static volatile bool processing_starcode;
+/// @brief `true` if we are delaying for a starcode
+static volatile bool delaying_for_starcode;
 static volatile StarCodeEntry* current_starcode = nullptr;
+/// @brief `true` when we are handling user input for a starcode
 static volatile bool doing_starcode = false;
 static uint16_t starcode_waiting_on_release;
 static char current[STARCODE_MAX_LEN + 1];
@@ -30,7 +32,7 @@ static size_t current_idx;
 static void starcode_trigger_cb(void* arg) {
     (void) arg;
 
-    processing_starcode = false;
+    delaying_for_starcode = false;
 
     if (current_starcode != nullptr) {
         if (current_starcode->triggered_sem != nullptr)
@@ -42,12 +44,12 @@ static void starcode_trigger_cb(void* arg) {
     }
 
     // TODO: rename star code everywhere to starcode
-    lcd_print_header_star_code();
+    lcd_print_header();
 }
 
 
 void star_code_handle_keypad(uint16_t* just_pressed, uint16_t* just_released) {
-    if ((!processing_starcode) && handling_new_starcodes &&  (*just_pressed & (1 << KeypadKey::star))) {
+    if ((!delaying_for_starcode) && handling_new_starcodes &&  (*just_pressed & (1 << KeypadKey::star))) {
         current_idx = 0;
         current[current_idx] = '\0';
         doing_starcode = true;
@@ -125,10 +127,13 @@ static bool check_code_match(const char* triggered, const char* expected) {
 }
 
 bool add_star_code(StarCodeEntry code) {
+    ESP_LOGI(TAG, "Adding starcode: %s", code.code);
     if (code.code == nullptr || strlen(code.code) > STARCODE_MAX_LEN) {
+        ESP_LOGW(TAG, "invalid code");
         return false;
     }
-    if (code.display_text != nullptr && strlen(code.display_text) > STARCODE_MAX_LEN + 1) {
+    if (code.display_text != nullptr && strlen(code.display_text) > STARCODE_DISPLAY_TEXT_MAX_LEN) {
+        ESP_LOGW(TAG, "invalid display_text");
         return false;
     }
 
@@ -139,7 +144,7 @@ bool add_star_code(StarCodeEntry code) {
 
     if (it != star_codes.end()) {
         // existing star code found!
-        ESP_LOGW(TAG, "Failed to add star code %s", code.code);
+        ESP_LOGW(TAG, "Duplicate starcode %s", code.code);
         return false;
     }
 
@@ -157,7 +162,9 @@ bool add_star_codes(const StarCodeEntry* codes, size_t len) {
     return success;
 }
 
-bool rm_star_code(const char* code){
+bool rm_star_code(const char* code) {
+    ESP_LOGI(TAG, "Removing starcode: %s", code);
+
     auto it = std::find_if(star_codes.begin(), star_codes.end(), [&](const StarCodeEntry& star_code) {
         return strcmp(code, star_code.code) == 0;
     });
@@ -196,18 +203,12 @@ void clear_star_codes() {
 }
 
 bool trigger_star_code(const char* code) {
-    ESP_LOGI(TAG, "Star codes to checK:");
-    for (const auto& entry : star_codes) {
-        ESP_LOGI(TAG, "%s", entry.code);
-    }
-
-
     auto it = std::find_if(star_codes.begin(), star_codes.end(), [&](const StarCodeEntry& other) {
         return check_code_match(code, other.code);
     });
 
     uint64_t delay_us = 2'000'000;
-    processing_starcode = true;
+    delaying_for_starcode = true;
     if (it != star_codes.end()) {
         current_starcode = &*it;
         delay_us = current_starcode->delay_us;
@@ -231,22 +232,25 @@ void lcd_print_header_star_code() {
     if (!lcd_header_enabled()) return;
 
     // TODO: consider upping the display text size to be able to overwrite the game_state area.
-    if (processing_starcode) {
+    if (delaying_for_starcode) {
         if (current_starcode == nullptr) {
-            lcd_print(0, 0, "Invalid  ");
+            lcd_print(0, 0, "Invalid starcode    ");
         } else if (current_starcode->display_text != nullptr) {
-            char buf[STARCODE_MAX_LEN + 2];
-            snprintf(buf, sizeof(buf), "%s", current_starcode->display_text);
+            char buf[21];
+            snprintf(buf, sizeof(buf), "%-20s", current_starcode->display_text);
             lcd_print(0, 0, buf);
         } else {
             lcd_print(0, 0, EMPTY_STAR_CODE_HEADER);
         }
-        
     } else if (doing_starcode) {
         char buf[STARCODE_MAX_LEN + 2];
-        snprintf(buf, sizeof(buf), "*%-8s", current);
+        snprintf(buf, sizeof(buf), "*%-9s", current);
         lcd_print(0, 0, buf);
     } else {
         lcd_print(0, 0, EMPTY_STAR_CODE_HEADER);
     }
 }
+
+bool lcd_starcode_displaying_result() {
+    return delaying_for_starcode;
+}

main/drivers/starcode.h

@@ -6,19 +6,20 @@
 #include <freertos/semphr.h>
 
 /// The max length of a starcode (not counting the star)
-#define STARCODE_MAX_LEN 8
+#define STARCODE_MAX_LEN 9
+#define STARCODE_DISPLAY_TEXT_MAX_LEN 20
 
 /// @brief A handler for a specific star code
 struct StarCodeEntry {
     /// @brief The star code without the star
     ///
-    /// This must be <= 8 characters.
+    /// This must be <= 9 characters.
     ///
     /// You may include a * in the code to match on any character
     const char* code;
     /// @brief The text to display when the star code is entered (or null).
     /// 
-    /// This must be <= 9 characters.
+    /// This must be <= 20 characters.
     const char* display_text;
     /// @brief The number of microseconds to delay when the star code is entered before calling the handler.
     uint64_t delay_us;
@@ -77,11 +78,13 @@ bool trigger_star_code(const char* code);
 /// If one is being handled currently, it is canceled.
 void set_star_code_sys_enabled(bool enable);
 
-/// @brief Gets weather or not the star code system is handling new star codes.
-/// @return `true` if the star code system is handling star codes.
+/// @return `true` iff the star code system is handling star codes.
 bool star_code_sys_enabled();
 
 /// @brief Prints the star code section of the header to the char_lcd. (row 0, columns 0-9)
 void lcd_print_header_star_code();
 
+/// @return `true` iff the starcode system is using the full header.
+bool lcd_starcode_displaying_result();
+
 #endif /* STAR_CODE_H */

main/drivers/tft.h

@@ -44,11 +44,11 @@
 #define SPI_MAX_TRANSFER_SIZE 32768
 
 #define TFT_PIN_MOSI GPIO_NUM_17
-#define TFT_PIN_MISO GPIO_NUM_18
-#define TFT_PIN_CLK GPIO_NUM_16
+#define TFT_PIN_MISO GPIO_NUM_16
+#define TFT_PIN_CLK GPIO_NUM_18
 #define TFT_PIN_CS GPIO_NUM_NC
-#define TFT_PIN_DC GPIO_NUM_15
-#define TFT_PIN_RESET GPIO_NUM_8
+#define TFT_PIN_DC GPIO_NUM_8
+#define TFT_PIN_RESET GPIO_NUM_9
 
 #define TFT_INVERT_COLOR false
 

main/drivers/wires.cpp

@@ -26,8 +26,8 @@ static void receive_button(void);
 void init_wires(void) {
     i2c_config_t wires_conf = {
         .mode = I2C_MODE_MASTER,
-        .sda_io_num = GPIO_NUM_41,
-        .scl_io_num = GPIO_NUM_42,
+        .sda_io_num = PIN_WIRES_SDA,
+        .scl_io_num = PIN_WIRES_SCL,
         .sda_pullup_en = GPIO_PULLUP_ENABLE,
         .scl_pullup_en = GPIO_PULLUP_ENABLE,
         .master = {
@@ -35,8 +35,8 @@ void init_wires(void) {
         },
     };
 
-    gpio_reset_pin(GPIO_NUM_41);
-    gpio_reset_pin(GPIO_NUM_42);
+    gpio_reset_pin(PIN_WIRES_SDA);
+    gpio_reset_pin(PIN_WIRES_SCL);
 
     ESP_ERROR_CHECK(i2c_param_config(WIRES_I2C_NUM, &wires_conf));
     ESP_ERROR_CHECK(i2c_driver_install(WIRES_I2C_NUM, wires_conf.mode, 0, 0, 0));

main/drivers/wires.h

@@ -8,8 +8,11 @@
 #include "drivers/char_lcd.h"
 #include "drivers/game_timer.h"
 #include "main.h"
+#include "perh.h"
 
-#define WIRES_PIN_DELTA GPIO_NUM_2
+#define WIRES_PIN_DELTA PIN_PERH3
+#define PIN_WIRES_SDA PIN_PERH1
+#define PIN_WIRES_SCL PIN_PERH2
 #define WIRES_I2C_NUM I2C_NUM_1
 #define WIRES_I2C_ADDR 125
 

main/main.cpp

@@ -13,19 +13,102 @@
 #include "helper.h"
 
 #include "steps/step0.h"
-#include "steps/step1.h"
-#include "steps/step2.h"
-#include "steps/step3.h"
-#include "steps/step4.h"
-#include "steps/step5.h"
-#include "steps/step6.h"
+#include "steps/p001_step1.h"
+#include "steps/p001_step2.h"
+#include "steps/p001_step3.h"
+#include "steps/p001_step4.h"
+#include "steps/p001_step5.h"
+#include "steps/p001_step6.h"
+#include "steps/p002_step1.h"
+#include "steps/p002_step2.h"
+#include "steps/p002_step3.h"
+#include "steps/p002_step4.h"
+#include "steps/p002_step5.h"
+#include "steps/p002_step6.h"
 
 static const char *TAG = "main";
 uint32_t initial_game_time = 90*60*1000 + 1000;
 uint32_t skip_to_step = 0;
 uint32_t current_step = 0;
+uint32_t puzzle = 0;
 extern uint32_t total_strikes;
 
+static void do_p001() {
+    set_game_time(initial_game_time);
+    start_game_timer();
+    total_strikes = 0;
+    clean_bomb();
+    current_step = 1;
+    if (skip_to_step <= 1) p001_step1();
+    step_finish_times[current_step-1] = get_game_time();
+    clean_bomb();
+    current_step = 2;
+    if (skip_to_step <= 2) p001_step2();
+    step_finish_times[current_step-1] = get_game_time();
+    clean_bomb();
+    current_step = 3;
+    if (skip_to_step <= 3) p001_step3();
+    step_finish_times[current_step-1] = get_game_time();
+    clean_bomb();
+    current_step = 4;
+    if (skip_to_step <= 4) p001_step4();
+    step_finish_times[current_step-1] = get_game_time();
+    clean_bomb();
+    current_step = 5;
+    if (skip_to_step <= 5) p001_step5();
+    step_finish_times[current_step-1] = get_game_time();
+    clean_bomb();
+    current_step = 6;
+    if (skip_to_step <= 6) p001_step6();
+    start_game_timer();
+    step_finish_times[current_step-1] = get_game_time();
+    clean_bomb();
+
+    stop_game_timer();
+    ESP_LOGI(TAG, "Bomb has been diffused. Counter-Terrorists win.");
+    play_clip_wav(MOUNT_POINT "/diffuse.wav", true, false, 3, 0);
+
+    display_game_results();
+}
+
+static void do_p002() {
+    set_game_time(initial_game_time);
+    start_game_timer();
+    total_strikes = 0;
+    clean_bomb();
+    current_step = 1;
+    if (skip_to_step <= 1) p002_step1();
+    step_finish_times[current_step-1] = get_game_time();
+    clean_bomb();
+    current_step = 2;
+    if (skip_to_step <= 2) p002_step2();
+    step_finish_times[current_step-1] = get_game_time();
+    clean_bomb();
+    current_step = 3;
+    if (skip_to_step <= 3) p002_step3();
+    step_finish_times[current_step-1] = get_game_time();
+    clean_bomb();
+    current_step = 4;
+    if (skip_to_step <= 4) p002_step4();
+    step_finish_times[current_step-1] = get_game_time();
+    clean_bomb();
+    current_step = 5;
+    if (skip_to_step <= 5) p002_step5();
+    step_finish_times[current_step-1] = get_game_time();
+    clean_bomb();
+    current_step = 6;
+    if (skip_to_step <= 6) p002_step6();
+    start_game_timer();
+    step_finish_times[current_step-1] = get_game_time();
+    clean_bomb();
+
+    stop_game_timer();
+    ESP_LOGI(TAG, "Bomb has been diffused. Counter-Terrorists win.");
+    play_clip_wav(MOUNT_POINT "/diffuse.wav", true, false, 3, 0);
+
+    display_game_results();
+}
+
 extern "C" void app_main(void) {
     printf("app_main\n");
 
@@ -40,49 +123,20 @@ extern "C" void app_main(void) {
     lcd_do_splash();
     step0();
 
-    // set_recording_source(stdout, false);
-    FILE* record_file = fopen(MOUNT_POINT "/record.txt", "w");
-    if (record_file == nullptr) {
-        ESP_LOGE("main", "failed to open record.txt");
+    if (puzzle == 1) {
+        do_p001();
+    } else {
+        do_p002();
     }
-    set_recording_source(record_file, true);
-    start_recording();
 
-    set_game_time(initial_game_time);
-    start_game_timer();
-    total_strikes = 0;
-    clean_bomb();
-    current_step = 1;
-    if (skip_to_step <= 1) step1();
-    step_finish_times[current_step-1] = get_game_time();
-    clean_bomb();
-    current_step = 2;
-    if (skip_to_step <= 2) step2();
-    step_finish_times[current_step-1] = get_game_time();
-    clean_bomb();
-    current_step = 3;
-    if (skip_to_step <= 3) step3();
-    step_finish_times[current_step-1] = get_game_time();
-    clean_bomb();
-    current_step = 4;
-    if (skip_to_step <= 4) step4();
-    step_finish_times[current_step-1] = get_game_time();
-    clean_bomb();
-    current_step = 5;
-    if (skip_to_step <= 5) step5();
-    step_finish_times[current_step-1] = get_game_time();
-    clean_bomb();
-    current_step = 6;
-    if (skip_to_step <= 6) step6();
-    start_game_timer();
-    step_finish_times[current_step-1] = get_game_time();
-    clean_bomb();
+    // set_recording_source(stdout, false);
+    // FILE* record_file = fopen(MOUNT_POINT "/record.txt", "w");
+    // if (record_file == nullptr) {
+        // ESP_LOGE("main", "failed to open record.txt");
+    // }
+    // set_recording_source(record_file, true);
+    // start_recording();
 
-    stop_game_timer();
-    ESP_LOGI(TAG, "Bomb has been diffused. Counter-Terrorists win.");
-    play_clip_wav(MOUNT_POINT "/diffuse.wav", true, false, 3, 0);
-
-    display_game_results();
-    stop_recording();
+    // stop_recording();
 
 }

main/steps/CMakeLists.txt

@@ -1,12 +1,18 @@
 set(SOURCES 
     "setup_wires.cpp"
     "step0.cpp"
-    "step1.cpp"
-    "step2.cpp"
-    "step3.cpp"
-    "step4.cpp"
-    "step5.cpp"
-    "step6.cpp"
+    "p001_step1.cpp"
+    "p001_step2.cpp"
+    "p001_step3.cpp"
+    "p001_step4.cpp"
+    "p001_step5.cpp"
+    "p001_step6.cpp"
+    "p002_step1.cpp"
+    "p002_step2.cpp"
+    "p002_step3.cpp"
+    "p002_step4.cpp"
+    "p002_step5.cpp"
+    "p002_step6.cpp"
     "wires_puzzle.cpp"
 )
 

main/steps/p001_step1.cpp

@@ -1,4 +1,4 @@
-#include "step1.h"
+#include "p001_step1.h"
 
 __attribute__((unused))
 static const char *TAG = "step1";
@@ -275,7 +275,7 @@ static bool play_part(uint32_t time) {
     return true;
 }
 
-void step1(void) {
+void p001_step1(void) {
     while (get_switch_flipped(nullptr));
 
     init_step();

main/steps/p001_step1.h

@@ -0,0 +1,10 @@
+#ifndef P001_STEP_1_H
+#define P001_STEP_1_H
+
+#include <random>
+#include "../drivers/all.h"
+#include "../helper.h"
+
+void p001_step1(void);
+
+#endif /* P001_STEP_1_H */

main/steps/p001_step2.cpp

@@ -1,4 +1,4 @@
-#include "step2.h"
+#include "p001_step2.h"
 
 __attribute__((unused))
 static const char *TAG = "step2";
@@ -91,7 +91,7 @@ static void new_puzzle(void) {
     set_module_sseg_raw(display_map);
 }
 
-void step2(void) {
+void p001_step2(void) {
     KeypadKey key;
     int solved_times = 0;
 

main/steps/p001_step2.h

@@ -1,5 +1,5 @@
-#ifndef STEP_2_H
-#define STEP_2_H
+#ifndef P001_STEP_2_H
+#define P001_STEP_2_H
 
 #include "../drivers/all.h"
 #include "../helper.h"
@@ -7,6 +7,6 @@
 #include <random>
 #include <map>
 
-void step2(void);
+void p001_step2(void);
 
-#endif /* STEP_2_H */
+#endif /* P001_STEP_2_H */

main/steps/p001_step3.cpp

@@ -1,4 +1,4 @@
-#include "step3.h"
+#include "p001_step3.h"
 
 #define ONE_SECOND_TIME 90'000
 #define THREE_SECOND_TIME 90'000
@@ -72,7 +72,7 @@ static bool one_second();
 static bool three_second();
 static bool six_second();
 
-void step3(void) {
+void p001_step3(void) {
     SemaphoreHandle_t continue_sem = xSemaphoreCreateBinary();
     if (continue_sem == nullptr) {
         ESP_LOGE(TAG, "could not create semaphore");

main/steps/p001_step3.h

@@ -0,0 +1,10 @@
+#ifndef P001_STEP_3_H
+#define P001_STEP_3_H
+
+#include <random>
+#include "../drivers/all.h"
+#include "../helper.h"
+
+void p001_step3(void);
+
+#endif /* P001_STEP_3_H */

main/steps/p001_step4.cpp

@@ -1,4 +1,4 @@
-#include "step4.h"
+#include "p001_step4.h"
 
 __attribute__((unused))
 static const char *TAG = "step4";
@@ -379,7 +379,7 @@ static void fail() {
     }
 }
 
-void step4() {
+void p001_step4() {
     // TODO: extract to helper function
     SemaphoreHandle_t continue_sem = xSemaphoreCreateBinary();
     if (continue_sem == nullptr) {

main/steps/p001_step4.h

@@ -1,5 +1,5 @@
-#ifndef STEP_4_H
-#define STEP_4_H
+#ifndef P001_STEP_4_H
+#define P001_STEP_4_H
 
 #include <random>
 #include "../drivers/all.h"
@@ -9,6 +9,6 @@
 #define TETRIS_USE_FLASH_IMG
 #define TETRIS_USE_FLASH_BG_IMG
 
-void step4(void);
+void p001_step4(void);
 
-#endif /* STEP_4_H */
+#endif /* P001_STEP_4_H */

main/steps/p001_step5.cpp

@@ -1,4 +1,4 @@
-#include "step5.h"
+#include "p001_step5.h"
 
 #define TIME_CLEAR   30'000
 #define TIME_PLANK   40'000
@@ -178,7 +178,7 @@ bool submit_6(bool* buttons_cycling, bool button_turned_on, int led_off) {
     return true;
 }
 
-void step5(void) {
+void p001_step5(void) {
     SemaphoreHandle_t continue_sem = xSemaphoreCreateBinary();
     if (continue_sem == nullptr) {
         ESP_LOGE(TAG, "could not create semaphore");

main/steps/p001_step5.h

@@ -1,5 +1,5 @@
-#ifndef STEP_5_H
-#define STEP_5_H
+#ifndef P001_STEP_5_H
+#define P001_STEP_5_H
 
 #include "../drivers/all.h"
 #include "../helper.h"
@@ -11,6 +11,6 @@
 #include <cmath>
 #include <array>
 
-void step5(void);
+void p001_step5(void);
 
-#endif /* STEP_5_H */
+#endif /* P001_STEP_5_H */

main/steps/p001_step6.cpp

@@ -1,11 +1,11 @@
-#include "step6.h"
+#include "p001_step6.h"
 
 __attribute__((unused))
 static const char *TAG = "step6";
 
 static uint8_t cut_wires = 0;
 
-void step6(void) {
+void p001_step6(void) {
     get_cut_wires();
     clear_all_pressed_released();
 

main/steps/p001_step6.h

@@ -0,0 +1,10 @@
+#ifndef P001_STEP_6_H
+#define P001_STEP_6_H
+
+#include "wires_puzzle.h"
+#include "../drivers/all.h"
+#include "../helper.h"
+
+void p001_step6(void);
+
+#endif /* P001_STEP_6_H */

main/steps/p002_step1.cpp

@@ -0,0 +1,10 @@
+#include "p002_step1.h"
+
+__attribute__((unused))
+static const char *TAG = "step1";
+
+void p002_step1(void) {
+    // TODO: implement step 1
+}
+
+

main/steps/p002_step1.h

@@ -0,0 +1,8 @@
+#ifndef P002_STEP_1_H
+#define P002_STEP_1_H
+
+#include "../drivers/all.h"
+
+void p002_step1(void);
+
+#endif /* P002_STEP_1_H */

main/steps/p002_step2.cpp

@@ -0,0 +1,8 @@
+#include "p002_step2.h"
+
+__attribute__((unused))
+static const char *TAG = "step2";
+
+void p002_step2(void) {
+    // TODO: implement step 2
+}

main/steps/p002_step2.h

@@ -0,0 +1,8 @@
+#ifndef P002_STEP_2_H
+#define P002_STEP_2_H
+
+#include "../drivers/all.h"
+
+void p002_step2(void);
+
+#endif /* P002_STEP_2_H */

main/steps/p002_step3.cpp

@@ -0,0 +1,8 @@
+#include "p002_step3.h"
+
+__attribute__((unused))
+static const char *TAG = "step3";
+
+void p002_step3(void) {
+    // TODO: implement step 3
+}

main/steps/p002_step3.h

@@ -0,0 +1,8 @@
+#ifndef P002_STEP_3_H
+#define P002_STEP_3_H
+
+#include "../drivers/all.h"
+
+void p002_step3(void);
+
+#endif /* P002_STEP_3_H */

main/steps/p002_step4.cpp

@@ -0,0 +1,8 @@
+#include "p002_step4.h"
+
+__attribute__((unused))
+static const char *TAG = "step4";
+
+void p002_step4(void) {
+    // TODO: implement step 4
+}

main/steps/p002_step4.h

@@ -0,0 +1,8 @@
+#ifndef P002_STEP_4_H
+#define P002_STEP_4_H
+
+#include "../drivers/all.h"
+
+void p002_step4(void);
+
+#endif /* P002_STEP_4_H */

main/steps/p002_step5.cpp

@@ -0,0 +1,8 @@
+#include "p002_step5.h"
+
+__attribute__((unused))
+static const char *TAG = "step5";
+
+void p002_step5(void) {
+    // TODO: implement step 5
+}

main/steps/p002_step5.h

@@ -0,0 +1,8 @@
+#ifndef P002_STEP_5_H
+#define P002_STEP_5_H
+
+#include "../drivers/all.h"
+
+void p002_step5(void);
+
+#endif /* P002_STEP_5_H */

main/steps/p002_step6.cpp

@@ -0,0 +1,8 @@
+#include "p002_step6.h"
+
+__attribute__((unused))
+static const char *TAG = "step6";
+
+void p002_step6(void) {
+    // TODO: implement step 6
+}

main/steps/p002_step6.h

@@ -0,0 +1,8 @@
+#ifndef P002_STEP_6_H
+#define P002_STEP_6_H
+
+#include "../drivers/all.h"
+
+void p002_step6(void);
+
+#endif /* P002_STEP_6_H */

main/steps/step0.cpp

@@ -5,6 +5,7 @@ static const char* TAG = "step0";
 
 extern uint32_t initial_game_time;
 extern uint32_t skip_to_step;
+extern uint32_t puzzle;
 
 static void set_game_time();
 static void skip_to_step1() { skip_to_step = 1; }
@@ -13,12 +14,12 @@ static void skip_to_step3() { skip_to_step = 3; }
 static void skip_to_step4() { skip_to_step = 4; }
 static void skip_to_step5() { skip_to_step = 5; }
 static void skip_to_step6() { skip_to_step = 6; }
-static void try_step1() { clean_bomb(); step1(); }
-static void try_step2() { clean_bomb(); step2(); }
-static void try_step3() { clean_bomb(); step3(); }
-static void try_step4() { clean_bomb(); step4(); }
-static void try_step5() { clean_bomb(); step5(); }
-static void try_step6() { clean_bomb(); step6(); }
+static void try_step1() { clean_bomb(); p001_step1(); }
+static void try_step2() { clean_bomb(); p001_step2(); }
+static void try_step3() { clean_bomb(); p001_step3(); }
+static void try_step4() { clean_bomb(); p001_step4(); }
+static void try_step5() { clean_bomb(); p001_step5(); }
+static void try_step6() { clean_bomb(); p001_step6(); }
 static void issue_strike() { strike("Strike Issued"); }
 static void flashbang();
 static void debug_switches();
@@ -45,6 +46,13 @@ static void replay_last() {
     start_playback();
 }
 
+static void do_p001() {
+    puzzle = 1;
+}
+
+static void do_p002() {
+    puzzle = 2;
+}
 
 void step0() {
     led_set(IndicatorLED::LED_SPEAKER, LEDColor::LED_COLOR_BLUE);
@@ -59,15 +67,22 @@ void step0() {
     StarCodeEntry star_codes[] = {
         {
             .code = "9819",
-            .display_text = "Defusal Initiated",
+            .display_text = "Start P001",
             .delay_us = 2'000'000,
-            .callback = nullptr,
+            .callback = do_p001,
             .triggered_sem = continue_sem,
         },
         {
-            .code = "59862",
-            .display_text = "Set Up Wires",
-            .delay_us = 10'000'000,
+            .code = "3141",
+            .display_text = "Start P002",
+            .delay_us = 2'000'000,
+            .callback = do_p002,
+            .triggered_sem = continue_sem,
+        },
+        {
+            .code = "59861",
+            .display_text = "Setup Wires",
+            .delay_us = 2'000'000,
             .callback = setup_wires,
             .triggered_sem = nullptr,
         },
@@ -80,7 +95,7 @@ void step0() {
         },
         {
             .code = "59863",
-            .display_text = "Debug Switches",
+            .display_text = "Debug switches",
             .delay_us = 2'000'000,
             .callback = debug_switches,
             .triggered_sem = nullptr,
@@ -192,7 +207,7 @@ void step0() {
         },
         {
             .code = "1113",
-            .display_text = "replay_last",
+            .display_text = "replay",
             .delay_us = 2'000'000,
             .callback = replay_last,
             .triggered_sem = continue_sem,

main/steps/step0.h

@@ -4,12 +4,12 @@
 #include "../drivers/all.h"
 
 #include "setup_wires.h"
-#include "step1.h"
-#include "step2.h"
-#include "step3.h"
-#include "step4.h"
-#include "step5.h"
-#include "step6.h"
+#include "p001_step1.h"
+#include "p001_step2.h"
+#include "p001_step3.h"
+#include "p001_step4.h"
+#include "p001_step5.h"
+#include "p001_step6.h"
 
 /// Wait for "*9819"
 void step0(void);

main/steps/step1.h

@@ -1,10 +0,0 @@
-#ifndef STEP_1_H
-#define STEP_1_H
-
-#include <random>
-#include "../drivers/all.h"
-#include "../helper.h"
-
-void step1(void);
-
-#endif /* STEP_1_H */

main/steps/step3.h

@@ -1,10 +0,0 @@
-#ifndef STEP_3_H
-#define STEP_3_H
-
-#include <random>
-#include "../drivers/all.h"
-#include "../helper.h"
-
-void step3(void);
-
-#endif /* STEP_3_H */

main/steps/step6.h

@@ -1,10 +0,0 @@
-#ifndef STEP_6_H
-#define STEP_6_H
-
-#include "wires_puzzle.h"
-#include "../drivers/all.h"
-#include "../helper.h"
-
-void step6(void);
-
-#endif /* STEP_6_H */

sdkconfig

@@ -1,6 +1,6 @@
 #
 # Automatically generated file. DO NOT EDIT.
-# Espressif IoT Development Framework (ESP-IDF) 5.3.2 Project Configuration
+# Espressif IoT Development Framework (ESP-IDF) 5.3.5 Project Configuration
 #
 CONFIG_SOC_MPU_MIN_REGION_SIZE=0x20000000
 CONFIG_SOC_MPU_REGIONS_MAX_NUM=8
@@ -11,6 +11,7 @@ CONFIG_SOC_PHY_SUPPORTED=y
 CONFIG_SOC_WIFI_SUPPORTED=y
 CONFIG_SOC_TWAI_SUPPORTED=y
 CONFIG_SOC_GDMA_SUPPORTED=y
+CONFIG_SOC_UHCI_SUPPORTED=y
 CONFIG_SOC_AHB_GDMA_SUPPORTED=y
 CONFIG_SOC_GPTIMER_SUPPORTED=y
 CONFIG_SOC_LCDCAM_SUPPORTED=y
@@ -64,6 +65,7 @@ CONFIG_SOC_LIGHT_SLEEP_SUPPORTED=y
 CONFIG_SOC_DEEP_SLEEP_SUPPORTED=y
 CONFIG_SOC_LP_PERIPH_SHARE_INTERRUPT=y
 CONFIG_SOC_PM_SUPPORTED=y
+CONFIG_SOC_SIMD_INSTRUCTION_SUPPORTED=y
 CONFIG_SOC_XTAL_SUPPORT_40M=y
 CONFIG_SOC_APPCPU_HAS_CLOCK_GATING_BUG=y
 CONFIG_SOC_ADC_RTC_CTRL_SUPPORTED=y
@@ -100,7 +102,8 @@ CONFIG_SOC_CPU_HAS_FPU=y
 CONFIG_SOC_HP_CPU_HAS_MULTIPLE_CORES=y
 CONFIG_SOC_CPU_BREAKPOINTS_NUM=2
 CONFIG_SOC_CPU_WATCHPOINTS_NUM=2
-CONFIG_SOC_CPU_WATCHPOINT_MAX_REGION_SIZE=64
+CONFIG_SOC_CPU_WATCHPOINT_MAX_REGION_SIZE=0x40
+CONFIG_SOC_SIMD_PREFERRED_DATA_ALIGNMENT=16
 CONFIG_SOC_DS_SIGNATURE_MAX_BIT_LEN=4096
 CONFIG_SOC_DS_KEY_PARAM_MD_IV_LENGTH=16
 CONFIG_SOC_DS_KEY_CHECK_MAX_WAIT_US=1100
@@ -176,7 +179,7 @@ CONFIG_SOC_RMT_CHANNELS_PER_GROUP=8
 CONFIG_SOC_RMT_MEM_WORDS_PER_CHANNEL=48
 CONFIG_SOC_RMT_SUPPORT_RX_PINGPONG=y
 CONFIG_SOC_RMT_SUPPORT_RX_DEMODULATION=y
-CONFIG_SOC_RMT_SUPPORT_TX_ASYNC_STOP=y
+CONFIG_SOC_RMT_SUPPORT_ASYNC_STOP=y
 CONFIG_SOC_RMT_SUPPORT_TX_LOOP_COUNT=y
 CONFIG_SOC_RMT_SUPPORT_TX_LOOP_AUTO_STOP=y
 CONFIG_SOC_RMT_SUPPORT_TX_SYNCHRO=y
@@ -203,7 +206,8 @@ CONFIG_SOC_RTCIO_PIN_COUNT=22
 CONFIG_SOC_RTCIO_INPUT_OUTPUT_SUPPORTED=y
 CONFIG_SOC_RTCIO_HOLD_SUPPORTED=y
 CONFIG_SOC_RTCIO_WAKE_SUPPORTED=y
-CONFIG_SOC_SDM_GROUPS=y
+CONFIG_SOC_LP_IO_CLOCK_IS_INDEPENDENT=y
+CONFIG_SOC_SDM_GROUPS=1
 CONFIG_SOC_SDM_CHANNELS_PER_GROUP=8
 CONFIG_SOC_SDM_CLK_SUPPORT_APB=y
 CONFIG_SOC_SPI_PERIPH_NUM=3
@@ -243,6 +247,8 @@ CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH=54
 CONFIG_SOC_TIMER_GROUP_SUPPORT_XTAL=y
 CONFIG_SOC_TIMER_GROUP_SUPPORT_APB=y
 CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS=4
+CONFIG_SOC_LP_TIMER_BIT_WIDTH_LO=32
+CONFIG_SOC_LP_TIMER_BIT_WIDTH_HI=16
 CONFIG_SOC_TOUCH_SENSOR_VERSION=2
 CONFIG_SOC_TOUCH_SENSOR_NUM=15
 CONFIG_SOC_TOUCH_SUPPORT_SLEEP_WAKEUP=y
@@ -265,6 +271,7 @@ CONFIG_SOC_UART_SUPPORT_WAKEUP_INT=y
 CONFIG_SOC_UART_SUPPORT_APB_CLK=y
 CONFIG_SOC_UART_SUPPORT_RTC_CLK=y
 CONFIG_SOC_UART_SUPPORT_XTAL_CLK=y
+CONFIG_SOC_UHCI_NUM=1
 CONFIG_SOC_USB_OTG_PERIPH_NUM=1
 CONFIG_SOC_SHA_DMA_MAX_BUFFER_SIZE=3968
 CONFIG_SOC_SHA_SUPPORT_DMA=y
@@ -350,6 +357,7 @@ CONFIG_SOC_WIFI_HW_TSF=y
 CONFIG_SOC_WIFI_FTM_SUPPORT=y
 CONFIG_SOC_WIFI_GCMP_SUPPORT=y
 CONFIG_SOC_WIFI_WAPI_SUPPORT=y
+CONFIG_SOC_WIFI_TXOP_SUPPORT=y
 CONFIG_SOC_WIFI_CSI_SUPPORT=y
 CONFIG_SOC_WIFI_MESH_SUPPORT=y
 CONFIG_SOC_WIFI_SUPPORT_VARIABLE_BEACON_WINDOW=y
@@ -539,7 +547,7 @@ CONFIG_PARTITION_TABLE_MD5=y
 #
 # BLK_BOX Config
 #
-CONFIG_USE_NEW_DISPLAY=y
+# CONFIG_USE_NEW_DISPLAY is not set
 # end of BLK_BOX Config
 
 #
@@ -593,7 +601,21 @@ CONFIG_APPTRACE_LOCK_ENABLE=y
 # Bluetooth
 #
 # CONFIG_BT_ENABLED is not set
-CONFIG_BT_ALARM_MAX_NUM=50
+
+#
+# Common Options
+#
+
+#
+# BLE Log
+#
+# CONFIG_BLE_LOG_ENABLED is not set
+# end of BLE Log
+
+# CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED is not set
+# CONFIG_BT_BLE_LOG_UHCI_OUT_ENABLED is not set
+# CONFIG_BT_LE_USED_MEM_STATISTICS_ENABLED is not set
+# end of Common Options
 # end of Bluetooth
 
 #
@@ -617,6 +639,7 @@ CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM=y
 # Legacy ADC Driver Configuration
 #
 # CONFIG_ADC_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_ADC_SKIP_LEGACY_CONFLICT_CHECK is not set
 
 #
 # Legacy ADC Calibration Configuration
@@ -629,42 +652,55 @@ CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM=y
 # Legacy MCPWM Driver Configurations
 #
 # CONFIG_MCPWM_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_MCPWM_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy MCPWM Driver Configurations
 
 #
 # Legacy Timer Group Driver Configurations
 #
 # CONFIG_GPTIMER_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_GPTIMER_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy Timer Group Driver Configurations
 
 #
 # Legacy RMT Driver Configurations
 #
 # CONFIG_RMT_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_RMT_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy RMT Driver Configurations
 
 #
 # Legacy I2S Driver Configurations
 #
 # CONFIG_I2S_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_I2S_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy I2S Driver Configurations
 
+#
+# Legacy I2C Driver Configurations
+#
+# CONFIG_I2C_SKIP_LEGACY_CONFLICT_CHECK is not set
+# end of Legacy I2C Driver Configurations
+
 #
 # Legacy PCNT Driver Configurations
 #
 # CONFIG_PCNT_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_PCNT_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy PCNT Driver Configurations
 
 #
 # Legacy SDM Driver Configurations
 #
 # CONFIG_SDM_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_SDM_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy SDM Driver Configurations
 
 #
 # Legacy Temperature Sensor Driver Configurations
 #
 # CONFIG_TEMP_SENSOR_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_TEMP_SENSOR_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy Temperature Sensor Driver Configurations
 # end of Driver Configurations
 
@@ -687,6 +723,7 @@ CONFIG_ESP_TLS_USE_DS_PERIPHERAL=y
 # CONFIG_ESP_TLS_SERVER_MIN_AUTH_MODE_OPTIONAL is not set
 # CONFIG_ESP_TLS_PSK_VERIFICATION is not set
 # CONFIG_ESP_TLS_INSECURE is not set
+CONFIG_ESP_TLS_DYN_BUF_STRATEGY_SUPPORTED=y
 # end of ESP-TLS
 
 #
@@ -724,6 +761,7 @@ CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
 CONFIG_GPTIMER_ISR_HANDLER_IN_IRAM=y
 # CONFIG_GPTIMER_CTRL_FUNC_IN_IRAM is not set
 # CONFIG_GPTIMER_ISR_IRAM_SAFE is not set
+CONFIG_GPTIMER_OBJ_CACHE_SAFE=y
 # CONFIG_GPTIMER_ENABLE_DEBUG_LOG is not set
 # end of ESP-Driver:GPTimer Configurations
 
@@ -807,6 +845,14 @@ CONFIG_SPI_SLAVE_ISR_IN_IRAM=y
 # CONFIG_UART_ISR_IN_IRAM is not set
 # end of ESP-Driver:UART Configurations
 
+#
+# ESP-Driver:UHCI Configurations
+#
+# CONFIG_UHCI_ISR_HANDLER_IN_IRAM is not set
+# CONFIG_UHCI_ISR_CACHE_SAFE is not set
+# CONFIG_UHCI_ENABLE_DEBUG_LOG is not set
+# end of ESP-Driver:UHCI Configurations
+
 #
 # ESP-Driver:USB Serial/JTAG Configuration
 #
@@ -842,6 +888,13 @@ CONFIG_ESP_GDBSTUB_SUPPORT_TASKS=y
 CONFIG_ESP_GDBSTUB_MAX_TASKS=32
 # end of GDB Stub
 
+#
+# ESP HID
+#
+CONFIG_ESPHID_TASK_SIZE_BT=2048
+CONFIG_ESPHID_TASK_SIZE_BLE=4096
+# end of ESP HID
+
 #
 # ESP HTTP client
 #
@@ -1015,7 +1068,11 @@ CONFIG_ESP_PHY_RF_CAL_PARTIAL=y
 # CONFIG_ESP_PHY_RF_CAL_NONE is not set
 # CONFIG_ESP_PHY_RF_CAL_FULL is not set
 CONFIG_ESP_PHY_CALIBRATION_MODE=0
+CONFIG_ESP_PHY_PLL_TRACK_PERIOD_MS=1000
 # CONFIG_ESP_PHY_PLL_TRACK_DEBUG is not set
+# CONFIG_ESP_PHY_RECORD_USED_TIME is not set
+CONFIG_ESP_PHY_IRAM_OPT=y
+# CONFIG_ESP_PHY_DEBUG is not set
 # end of PHY
 
 #
@@ -1035,9 +1092,11 @@ CONFIG_SPIRAM=y
 #
 # SPI RAM config
 #
-# CONFIG_SPIRAM_MODE_QUAD is not set
-CONFIG_SPIRAM_MODE_OCT=y
+CONFIG_SPIRAM_MODE_QUAD=y
+# CONFIG_SPIRAM_MODE_OCT is not set
 CONFIG_SPIRAM_TYPE_AUTO=y
+# CONFIG_SPIRAM_TYPE_ESPPSRAM16 is not set
+# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set
 # CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set
 CONFIG_SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY=y
 CONFIG_SPIRAM_CLK_IO=30
@@ -1045,11 +1104,12 @@ CONFIG_SPIRAM_CS_IO=26
 # CONFIG_SPIRAM_XIP_FROM_PSRAM is not set
 # CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set
 # CONFIG_SPIRAM_RODATA is not set
+# CONFIG_SPIRAM_SPEED_120M is not set
 # CONFIG_SPIRAM_SPEED_80M is not set
 CONFIG_SPIRAM_SPEED_40M=y
 CONFIG_SPIRAM_SPEED=40
-# CONFIG_SPIRAM_ECC_ENABLE is not set
 CONFIG_SPIRAM_BOOT_INIT=y
+CONFIG_SPIRAM_PRE_CONFIGURE_MEMORY_PROTECTION=y
 # CONFIG_SPIRAM_IGNORE_NOTFOUND is not set
 # CONFIG_SPIRAM_USE_MEMMAP is not set
 # CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
@@ -1214,9 +1274,9 @@ CONFIG_ESP_WIFI_ENABLED=y
 CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=10
 CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM=32
 CONFIG_ESP_WIFI_STATIC_TX_BUFFER=y
+# CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER is not set
 CONFIG_ESP_WIFI_TX_BUFFER_TYPE=0
 CONFIG_ESP_WIFI_STATIC_TX_BUFFER_NUM=16
-CONFIG_ESP_WIFI_CACHE_TX_BUFFER_NUM=32
 CONFIG_ESP_WIFI_STATIC_RX_MGMT_BUFFER=y
 # CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUFFER is not set
 CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUF=0
@@ -1226,7 +1286,6 @@ CONFIG_ESP_WIFI_AMPDU_TX_ENABLED=y
 CONFIG_ESP_WIFI_TX_BA_WIN=6
 CONFIG_ESP_WIFI_AMPDU_RX_ENABLED=y
 CONFIG_ESP_WIFI_RX_BA_WIN=6
-# CONFIG_ESP_WIFI_AMSDU_TX_ENABLED is not set
 CONFIG_ESP_WIFI_NVS_ENABLED=y
 CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_0=y
 # CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_1 is not set
@@ -1268,7 +1327,6 @@ CONFIG_ESP_WIFI_MBEDTLS_TLS_CLIENT=y
 # end of WPS Configuration Options
 
 # CONFIG_ESP_WIFI_DEBUG_PRINT is not set
-# CONFIG_ESP_WIFI_TESTING_OPTIONS is not set
 CONFIG_ESP_WIFI_ENTERPRISE_SUPPORT=y
 # CONFIG_ESP_WIFI_ENT_FREE_DYNAMIC_BUFFER is not set
 # end of Wi-Fi
@@ -1398,7 +1456,6 @@ CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2
 CONFIG_HAL_WDT_USE_ROM_IMPL=y
 CONFIG_HAL_SPI_MASTER_FUNC_IN_IRAM=y
 CONFIG_HAL_SPI_SLAVE_FUNC_IN_IRAM=y
-# CONFIG_HAL_ECDSA_GEN_SIG_CM is not set
 # end of Hardware Abstraction Layer (HAL) and Low Level (LL)
 
 #
@@ -1487,6 +1544,7 @@ CONFIG_LWIP_DHCPS=y
 CONFIG_LWIP_DHCPS_LEASE_UNIT=60
 CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8
 CONFIG_LWIP_DHCPS_STATIC_ENTRIES=y
+CONFIG_LWIP_DHCPS_ADD_DNS=y
 # end of DHCP server
 
 # CONFIG_LWIP_AUTOIP is not set
@@ -1638,6 +1696,7 @@ CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
 # CONFIG_MBEDTLS_X509_TRUSTED_CERT_CALLBACK is not set
 # CONFIG_MBEDTLS_SSL_CONTEXT_SERIALIZATION is not set
 CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE=y
+# CONFIG_MBEDTLS_SSL_KEYING_MATERIAL_EXPORT is not set
 CONFIG_MBEDTLS_PKCS7_C=y
 # end of mbedTLS v3.x related
 
@@ -1671,6 +1730,7 @@ CONFIG_MBEDTLS_HAVE_TIME=y
 # CONFIG_MBEDTLS_PLATFORM_TIME_ALT is not set
 # CONFIG_MBEDTLS_HAVE_TIME_DATE is not set
 CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y
+CONFIG_MBEDTLS_SHA1_C=y
 CONFIG_MBEDTLS_SHA512_C=y
 # CONFIG_MBEDTLS_SHA3_C is not set
 CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
@@ -1750,6 +1810,7 @@ CONFIG_MBEDTLS_ECP_FIXED_POINT_OPTIM=y
 # CONFIG_MBEDTLS_THREADING_C is not set
 CONFIG_MBEDTLS_ERROR_STRINGS=y
 CONFIG_MBEDTLS_FS_IO=y
+# CONFIG_MBEDTLS_ALLOW_WEAK_CERTIFICATE_VERIFICATION is not set
 # end of mbedTLS
 
 #
@@ -1800,25 +1861,12 @@ CONFIG_STDATOMIC_S32C1I_SPIRAM_WORKAROUND=y
 # CONFIG_OPENTHREAD_ENABLED is not set
 
 #
-# Thread Operational Dataset
+# OpenThread Spinel
 #
-CONFIG_OPENTHREAD_NETWORK_NAME="OpenThread-ESP"
-CONFIG_OPENTHREAD_MESH_LOCAL_PREFIX="fd00:db8:a0:0::/64"
-CONFIG_OPENTHREAD_NETWORK_CHANNEL=15
-CONFIG_OPENTHREAD_NETWORK_PANID=0x1234
-CONFIG_OPENTHREAD_NETWORK_EXTPANID="dead00beef00cafe"
-CONFIG_OPENTHREAD_NETWORK_MASTERKEY="00112233445566778899aabbccddeeff"
-CONFIG_OPENTHREAD_NETWORK_PSKC="104810e2315100afd6bc9215a6bfac53"
-# end of Thread Operational Dataset
-
-CONFIG_OPENTHREAD_XTAL_ACCURACY=130
 # CONFIG_OPENTHREAD_SPINEL_ONLY is not set
-CONFIG_OPENTHREAD_RX_ON_WHEN_IDLE=y
+# end of OpenThread Spinel
 
-#
-# Thread Address Query Config
-#
-# end of Thread Address Query Config
+# CONFIG_OPENTHREAD_DEBUG is not set
 # end of OpenThread
 
 #
@@ -1827,6 +1875,7 @@ CONFIG_OPENTHREAD_RX_ON_WHEN_IDLE=y
 CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_0=y
 CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_1=y
 CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_2=y
+CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_PATCH_VERSION=y
 # end of Protocomm
 
 #
@@ -1878,6 +1927,7 @@ CONFIG_SPI_FLASH_SUSPEND_QVL_SUPPORTED=y
 # CONFIG_SPI_FLASH_AUTO_SUSPEND is not set
 CONFIG_SPI_FLASH_SUSPEND_TSUS_VAL_US=50
 # CONFIG_SPI_FLASH_FORCE_ENABLE_XMC_C_SUSPEND is not set
+# CONFIG_SPI_FLASH_FORCE_ENABLE_C6_H2_SUSPEND is not set
 # end of Optional and Experimental Features (READ DOCS FIRST)
 # end of Main Flash configuration
 
@@ -2457,7 +2507,6 @@ CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
 CONFIG_ESP32S3_DEBUG_OCDAWARE=y
 CONFIG_BROWNOUT_DET=y
 CONFIG_ESP32S3_BROWNOUT_DET=y
-CONFIG_ESP32S3_BROWNOUT_DET=y
 CONFIG_BROWNOUT_DET_LVL_SEL_7=y
 CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_7=y
 # CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set
@@ -2480,17 +2529,14 @@ CONFIG_ESP32_WIFI_ENABLED=y
 CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10
 CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
 CONFIG_ESP32_WIFI_STATIC_TX_BUFFER=y
+# CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER is not set
 CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=0
 CONFIG_ESP32_WIFI_STATIC_TX_BUFFER_NUM=16
-CONFIG_ESP32_WIFI_CACHE_TX_BUFFER_NUM=32
 # CONFIG_ESP32_WIFI_CSI_ENABLED is not set
 CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
 CONFIG_ESP32_WIFI_TX_BA_WIN=6
 CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
-CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
 CONFIG_ESP32_WIFI_RX_BA_WIN=6
-CONFIG_ESP32_WIFI_RX_BA_WIN=6
-# CONFIG_ESP32_WIFI_AMSDU_TX_ENABLED is not set
 CONFIG_ESP32_WIFI_NVS_ENABLED=y
 CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y
 # CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set
@@ -2511,7 +2557,6 @@ CONFIG_WPA_MBEDTLS_TLS_CLIENT=y
 # CONFIG_WPA_WPS_SOFTAP_REGISTRAR is not set
 # CONFIG_WPA_WPS_STRICT is not set
 # CONFIG_WPA_DEBUG_PRINT is not set
-# CONFIG_WPA_TESTING_OPTIONS is not set
 # CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set
 # CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set
 CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y