rfid working

2024-06-12 22:57:35 -05:00 · 2024-06-12 22:57:35 -05:00 · 0b0d0f4875
commit 0b0d0f4875
parent 2e9120f117
24 changed files with 14363 additions and 12915 deletions
--- a/Core/Inc/RFID.h
+++ b/Core/Inc/RFID.h
@ -0,0 +1,196 @@
+/*
+ * RFID.h
+ *
+ *  Created on: Jan 16, 2022
+ *      Author: hussam
+ */
+
+
+
+#ifndef RFID_H_
+#define RFID_H_
+
+
+#include "stdbool.h"
+#include "stdint.h"
+
+
+#define MFRC522_CS_LOW          MFRC522_CS_PORT->BSRRH = MFRC522_CS_PIN;
+#define MFRC522_CS_HIGH         MFRC522_CS_PORT->BSRRL = MFRC522_CS_PIN;
+
+/* MFRC522 Commands */
+#define PCD_IDLE            0x00   //NO action; Cancel the current command
+#define PCD_AUTHENT           0x0E   //Authentication Key
+#define PCD_RECEIVE           0x08   //Receive Data
+#define PCD_TRANSMIT          0x04   //Transmit data
+#define PCD_TRANSCEIVE          0x0C   //Transmit and receive data,
+#define PCD_RESETPHASE          0x0F   //Reset
+#define PCD_CALCCRC           0x03   //CRC Calculate
+
+/* Mifare_One card command word */
+#define PICC_REQIDL           0x26   // find the antenna area does not enter hibernation
+#define PICC_REQALL           0x52   // find all the cards antenna area
+#define PICC_ANTICOLL         0x93   // anti-collision
+#define PICC_SElECTTAG          0x93   // election card
+#define PICC_AUTHENT1A          0x60   // authentication key A
+#define PICC_AUTHENT1B          0x61   // authentication key B
+#define PICC_READ           0x30   // Read Block
+#define PICC_WRITE            0xA0   // write block
+#define PICC_DECREMENT          0xC0   // debit
+#define PICC_INCREMENT          0xC1   // recharge
+#define PICC_RESTORE          0xC2   // transfer block data to the buffer
+#define PICC_TRANSFER         0xB0   // save the data in the buffer
+#define PICC_HALT           0x50   // Sleep
+
+/* MFRC522 Registers */
+//Page 0: Command and Status
+#define MFRC522_REG_RESERVED00      0x00
+#define MFRC522_REG_COMMAND       0x01
+#define MFRC522_REG_COMM_IE_N     0x02
+#define MFRC522_REG_DIV1_EN       0x03
+#define MFRC522_REG_COMM_IRQ      0x04
+#define MFRC522_REG_DIV_IRQ       0x05
+#define MFRC522_REG_ERROR       0x06
+#define MFRC522_REG_STATUS1       0x07
+#define MFRC522_REG_STATUS2       0x08
+#define MFRC522_REG_FIFO_DATA     0x09
+#define MFRC522_REG_FIFO_LEVEL      0x0A
+#define MFRC522_REG_WATER_LEVEL     0x0B
+#define MFRC522_REG_CONTROL       0x0C
+#define MFRC522_REG_BIT_FRAMING     0x0D
+#define MFRC522_REG_COLL        0x0E
+#define MFRC522_REG_RESERVED01      0x0F
+//Page 1: Command
+#define MFRC522_REG_RESERVED10      0x10
+#define MFRC522_REG_MODE        0x11
+#define MFRC522_REG_TX_MODE       0x12
+#define MFRC522_REG_RX_MODE       0x13
+#define MFRC522_REG_TX_CONTROL      0x14
+#define MFRC522_REG_TX_AUTO       0x15
+#define MFRC522_REG_TX_SELL       0x16
+#define MFRC522_REG_RX_SELL       0x17
+#define MFRC522_REG_RX_THRESHOLD    0x18
+#define MFRC522_REG_DEMOD       0x19
+#define MFRC522_REG_RESERVED11      0x1A
+#define MFRC522_REG_RESERVED12      0x1B
+#define MFRC522_REG_MIFARE        0x1C
+#define MFRC522_REG_RESERVED13      0x1D
+#define MFRC522_REG_RESERVED14      0x1E
+#define MFRC522_REG_SERIALSPEED     0x1F
+//Page 2: CFG
+#define MFRC522_REG_RESERVED20      0x20
+#define MFRC522_REG_CRC_RESULT_M    0x21
+#define MFRC522_REG_CRC_RESULT_L    0x22
+#define MFRC522_REG_RESERVED21      0x23
+#define MFRC522_REG_MOD_WIDTH     0x24
+#define MFRC522_REG_RESERVED22      0x25
+#define MFRC522_REG_RF_CFG        0x26
+#define MFRC522_REG_GS_N        0x27
+#define MFRC522_REG_CWGS_PREG     0x28
+#define MFRC522_REG__MODGS_PREG     0x29
+#define MFRC522_REG_T_MODE        0x2A
+#define MFRC522_REG_T_PRESCALER     0x2B
+#define MFRC522_REG_T_RELOAD_H      0x2C
+#define MFRC522_REG_T_RELOAD_L      0x2D
+#define MFRC522_REG_T_COUNTER_VALUE_H 0x2E
+#define MFRC522_REG_T_COUNTER_VALUE_L 0x2F
+//Page 3:TestRegister
+#define MFRC522_REG_RESERVED30      0x30
+#define MFRC522_REG_TEST_SEL1     0x31
+#define MFRC522_REG_TEST_SEL2     0x32
+#define MFRC522_REG_TEST_PIN_EN     0x33
+#define MFRC522_REG_TEST_PIN_VALUE    0x34
+#define MFRC522_REG_TEST_BUS      0x35
+#define MFRC522_REG_AUTO_TEST     0x36
+#define MFRC522_REG_VERSION       0x37
+#define MFRC522_REG_ANALOG_TEST     0x38
+#define MFRC522_REG_TEST_ADC1     0x39
+#define MFRC522_REG_TEST_ADC2     0x3A
+#define MFRC522_REG_TEST_ADC0     0x3B
+#define MFRC522_REG_RESERVED31      0x3C
+#define MFRC522_REG_RESERVED32      0x3D
+#define MFRC522_REG_RESERVED33      0x3E
+#define MFRC522_REG_RESERVED34      0x3F
+//Dummy byte
+#define MFRC522_DUMMY         0x00
+
+#define MFRC522_MAX_LEN         16
+
+
+/**
+ * @brief initialize function
+ */
+void rc522_init(void);
+
+/**
+ * @brief read register
+ */
+uint8_t rc522_regRead8(uint8_t reg);
+
+/**
+ * @brief write register
+ */
+void rc522_regWrite8(uint8_t reg, uint8_t data8);
+
+/**
+ * @brief set bit
+ */
+void rc522_setBit(uint8_t reg, uint8_t mask);
+
+/**
+ * @brief clear bit
+ */
+void rc522_clearBit(uint8_t reg, uint8_t mask);
+
+/**
+ * @brief reset function
+ */
+void rc522_reset(void);
+
+/**
+ * @brief Antenna ON
+ */
+void rc522_antennaON(void);
+
+/**
+ * @brief Check card
+ */
+bool rc522_checkCard(uint8_t *id);
+
+/**
+ * @brief Request function
+ */
+bool rc522_request(uint8_t reqMode, uint8_t *tagType);
+
+/**
+ * @brief to Card
+ */
+bool rc522_toCard(
+    uint8_t command,
+    uint8_t* sendData,
+    uint8_t sendLen,
+    uint8_t* backData,
+    uint16_t* backLen);
+
+/**
+ * @brief Anti-Collis
+ */
+bool rc522_antiColl(uint8_t* serNum);
+
+/**
+ * @brief Halt
+ */
+void rc522_halt(void);
+
+/**
+ * @brief calculate CRC
+ */
+void rc522_calculateCRC(uint8_t*  pIndata, uint8_t len, uint8_t* pOutData);
+
+/**
+ * @brief compare IDs
+ */
+bool rc522_compareIds(uint8_t *idCurrent, uint8_t *idReference);
+
+
+#endif /* RFID_H_ */
--- a/Core/Inc/main.h
+++ b/Core/Inc/main.h
@ -54,11 +54,14 @@ void Error_Handler(void);

 /* USER CODE BEGIN EFP */

+extern SPI_HandleTypeDef hspi1;
 /* USER CODE END EFP */

 /* Private defines -----------------------------------------------------------*/
 #define INT_Pin GPIO_PIN_1
 #define INT_GPIO_Port GPIOA
+#define RFID_CS_Pin GPIO_PIN_4
+#define RFID_CS_GPIO_Port GPIOA
 #define HALL_Pin GPIO_PIN_0
 #define HALL_GPIO_Port GPIOB
 #define CLOSE_Pin GPIO_PIN_1
--- a/Core/Src/RFID.c
+++ b/Core/Src/RFID.c
@ -0,0 +1,341 @@
+#include "RFID.h"
+#include "main.h"
+#include "stdbool.h"
+#include "stdio.h"
+
+/**
+ * @brief initialize function
+ */
+
+/**
+ * @brief read register
+ */
+
+
+bool rc522_toCard(
+    uint8_t command,
+    uint8_t* sendData,
+    uint8_t sendLen,
+    uint8_t* backData,
+    uint16_t* backLen);
+
+bool rc522_request(uint8_t reqMode, uint8_t *tagType);
+
+bool rc522_antiColl(uint8_t* serNum);
+
+void spi_cs_rfid_write(bool state)
+{
+	HAL_GPIO_WritePin(RFID_CS_GPIO_Port, RFID_CS_Pin, state);
+}
+
+uint8_t rc522_regRead8(uint8_t reg)
+{
+  spi_cs_rfid_write(0);
+  reg = ((reg << 1) & 0x7E) | 0x80;
+//  spi1_transmit(&reg, 1);
+  // TODO: change to interrupting or something.
+  HAL_SPI_Transmit(&hspi1, &reg, 1, 1000);
+  uint8_t dataRd=0;
+  HAL_SPI_Receive(&hspi1, &dataRd, 1, 1000);
+//  spi1_receive(&dataRd, 1);
+  spi_cs_rfid_write(1);
+  return dataRd;
+}
+
+/**
+ * @brief write register
+ */
+void rc522_regWrite8(uint8_t reg, uint8_t data8)
+{
+  spi_cs_rfid_write(0);
+  uint8_t txData[2] = {0x7E&(reg << 1), data8};
+//  spi1_transmit(txData, 2);
+  HAL_SPI_Transmit(&hspi1, (uint8_t*)&txData, 2, 1000);
+  spi_cs_rfid_write(1);
+}
+
+/**
+ * @brief set bit
+ */
+void rc522_setBit(uint8_t reg, uint8_t mask)
+{
+  rc522_regWrite8(reg, rc522_regRead8(reg)|mask);
+}
+
+/**
+ * @brief clear bit
+ */
+void rc522_clearBit(uint8_t reg, uint8_t mask)
+{
+  rc522_regWrite8(reg, rc522_regRead8(reg)&(~mask));
+}
+
+/**
+ * @brief reset function
+ */
+void rc522_reset(void)
+{
+  rc522_regWrite8(0x01, 0x0F);
+}
+
+/**
+ * @brief Antenna ON
+ */
+void rc522_antennaON(void)
+{
+  uint8_t temp;
+
+  temp = rc522_regRead8(MFRC522_REG_TX_CONTROL);
+  if (!(temp & 0x03)) {
+    rc522_setBit(MFRC522_REG_TX_CONTROL, 0x03);
+  }
+}
+
+/**
+ * @brief Check card
+ */
+bool rc522_checkCard(uint8_t *id)
+{
+  bool status=false;
+  //Find cards, return card type
+    status = rc522_request(PICC_REQIDL, id);
+    if (status == true) {
+      //Card detected
+      //Anti-collision, return card serial number 4 bytes
+      status = rc522_antiColl(id);
+    }
+    rc522_halt();      //Command card into hibernation
+
+    return status;
+}
+
+/**
+ * @brief Request function
+ */
+bool rc522_request(uint8_t reqMode, uint8_t *tagType)
+{
+  bool status=false;
+  uint16_t backBits;
+  rc522_regWrite8(MFRC522_REG_BIT_FRAMING, 0x07);
+  tagType[0] = reqMode;
+  status = rc522_toCard(PCD_TRANSCEIVE, tagType, 1, tagType, &backBits);
+  if ((status != true) || (backBits != 0x10)) {
+    status = false;
+  }
+  return status;
+}
+
+/**
+ * @brief to Card
+ */
+bool rc522_toCard(
+    uint8_t command,
+    uint8_t* sendData,
+    uint8_t sendLen,
+    uint8_t* backData,
+    uint16_t* backLen)
+{
+  bool status = false;
+  uint8_t irqEn = 0x00;
+  uint8_t waitIRq = 0x00;
+  uint8_t lastBits;
+  uint8_t n;
+  uint16_t i;
+
+  switch (command) {
+    case PCD_AUTHENT: {
+      irqEn = 0x12;
+      waitIRq = 0x10;
+      break;
+    }
+    case PCD_TRANSCEIVE: {
+      irqEn = 0x77;
+      waitIRq = 0x30;
+      break;
+    }
+    default:
+      break;
+  }
+
+  rc522_regWrite8(MFRC522_REG_COMM_IE_N, irqEn | 0x80);
+  rc522_clearBit(MFRC522_REG_COMM_IRQ, 0x80);
+  rc522_setBit(MFRC522_REG_FIFO_LEVEL, 0x80);
+
+  rc522_regWrite8(MFRC522_REG_COMMAND, PCD_IDLE);
+
+  //Writing data to the FIFO
+  for (i = 0; i < sendLen; i++) {
+    rc522_regWrite8(MFRC522_REG_FIFO_DATA, sendData[i]);
+  }
+
+  //Execute the command
+  rc522_regWrite8(MFRC522_REG_COMMAND, command);
+  if (command == PCD_TRANSCEIVE) {
+    rc522_setBit(MFRC522_REG_BIT_FRAMING, 0x80);   //StartSend=1,transmission of data starts
+  }
+
+  //Waiting to receive data to complete
+  i = 100;  //i according to the clock frequency adjustment, the operator M1 card maximum waiting time 25ms???
+  do {
+    //CommIrqReg[7..0]
+    //Set1 TxIRq RxIRq IdleIRq HiAlerIRq LoAlertIRq ErrIRq TimerIRq
+    n = rc522_regRead8(MFRC522_REG_COMM_IRQ);
+    i--;
+  } while ((i!=0) && !(n&0x01) && !(n&waitIRq));
+
+  rc522_clearBit(MFRC522_REG_BIT_FRAMING, 0x80);     //StartSend=0
+
+  if (i != 0)  {
+    if (!(rc522_regRead8(MFRC522_REG_ERROR) & 0x1B)) {
+      status = true;
+      if (n & irqEn & 0x01) {
+        status = false;
+      }
+
+      if (command == PCD_TRANSCEIVE) {
+        n = rc522_regRead8(MFRC522_REG_FIFO_LEVEL);
+        uint8_t l = n;
+        lastBits = rc522_regRead8(MFRC522_REG_CONTROL) & 0x07;
+        if (lastBits) {
+          *backLen = (n - 1) * 8 + lastBits;
+        } else {
+          *backLen = n * 8;
+        }
+
+        if (n == 0) {
+          n = 1;
+        }
+        if (n > MFRC522_MAX_LEN) {
+          n = MFRC522_MAX_LEN;
+        }
+
+        //Reading the received data in FIFO
+        for (i = 0; i < n; i++) {
+          uint8_t d = rc522_regRead8(MFRC522_REG_FIFO_DATA);
+          if (l == 4)
+            printf("%02x ", d);
+          backData[i] = d;
+        }
+        if (l==4)
+          printf("\r\n");
+        return status;
+      }
+    } else {
+      printf("error\r\n");
+      status = false;
+    }
+  }
+
+  return status;
+}
+
+bool rc522_antiColl(uint8_t* serNum)
+{
+  bool status;
+  uint8_t i;
+  uint8_t serNumCheck = 0;
+  uint16_t unLen;
+  //for (i = 0; i < 4; i++)
+//    printf("Anticoll In %d: 0x%02x\r\n", i, serNum[i]);
+
+
+  rc522_regWrite8(MFRC522_REG_BIT_FRAMING, 0x00);    //TxLastBists = BitFramingReg[2..0]
+
+  serNum[0] = PICC_ANTICOLL;
+  serNum[1] = 0x20;
+  status = rc522_toCard(PCD_TRANSCEIVE, serNum, 2, serNum, &unLen);
+
+  //for (i = 0; i < 4; i++)
+//      printf("Anticoll ToCard %d: 0x%02x\r\n", i, serNum[i]);
+
+  if (status == true) {
+    //Check card serial number
+    for (i = 0; i < 4; i++) {
+      serNumCheck ^= serNum[i];
+    }
+    if (serNumCheck != serNum[i]) {
+      status = false;
+    }
+  }
+  return status;
+}
+
+void rc522_halt(void)
+{
+  uint16_t unLen;
+  uint8_t buff[4];
+
+  buff[0] = PICC_HALT;
+  buff[1] = 0;
+  rc522_calculateCRC(buff, 2, &buff[2]);
+
+  rc522_toCard(PCD_TRANSCEIVE, buff, 4, buff, &unLen);
+}
+
+void rc522_calculateCRC(uint8_t*  pIndata, uint8_t len, uint8_t* pOutData)
+{
+  uint8_t i, n;
+
+  rc522_clearBit(MFRC522_REG_DIV_IRQ, 0x04);     //CRCIrq = 0
+  rc522_setBit(MFRC522_REG_FIFO_LEVEL, 0x80);      //Clear the FIFO pointer
+  //Write_MFRC522(CommandReg, PCD_IDLE);
+
+  //Writing data to the FIFO
+  for (i = 0; i < len; i++) {
+    rc522_regWrite8(MFRC522_REG_FIFO_DATA, *(pIndata+i));
+  }
+  rc522_regWrite8(MFRC522_REG_COMMAND, PCD_CALCCRC);
+
+  //Wait CRC calculation is complete
+  i = 0xFF;
+  do {
+    n = rc522_regRead8(MFRC522_REG_DIV_IRQ);
+    i--;
+  } while ((i!=0) && !(n&0x04));      //CRCIrq = 1
+
+  //Read CRC calculation result
+  pOutData[0] = rc522_regRead8(MFRC522_REG_CRC_RESULT_L);
+  pOutData[1] = rc522_regRead8(MFRC522_REG_CRC_RESULT_M);
+}
+
+/**
+ * @brief compare IDs
+ */
+bool rc522_compareIds(uint8_t *idCurrent, uint8_t *idReference)
+{
+  uint8_t i;
+  for(i=0; i<4;i++)
+  {
+    if(idCurrent[i] != idReference[i])
+    {
+      return false;
+    }
+  }
+  return true;
+}
+
+void rc522_init(void)
+{
+	/*
+	 * STM32 ->RFID
+	 * SPI  -> SPI
+	 * PA8  ->RST
+	 * PB0  ->CS
+	 * */
+
+  HAL_GPIO_WritePin(RFID_RST_GPIO_Port, RFID_RST_Pin, 0);
+  HAL_GPIO_WritePin(RFID_RST_GPIO_Port, RFID_RST_Pin, 1);
+  rc522_reset();
+
+  rc522_regWrite8(MFRC522_REG_T_MODE, 0x80);
+  rc522_regWrite8(MFRC522_REG_T_PRESCALER, 0xA9);
+  rc522_regWrite8(MFRC522_REG_T_RELOAD_L, 0xE8);
+  rc522_regWrite8(MFRC522_REG_T_RELOAD_H, 0x03);
+
+
+  rc522_regWrite8(MFRC522_REG_TX_AUTO, 0x40);
+  rc522_regWrite8(MFRC522_REG_MODE, 0x3D);
+
+  rc522_antennaON();   //Open the antenna
+}
+
--- a/Core/Src/main.c
+++ b/Core/Src/main.c
@ -21,6 +21,7 @@

 /* Private includes ----------------------------------------------------------*/
 /* USER CODE BEGIN Includes */
+#include "RFID.h"
 #include <stdio.h>
 /* USER CODE END Includes */

@ -128,22 +129,27 @@ int main(void)
  /* USER CODE BEGIN 2 */
  init_keypad();
  init_buttons();
+  rc522_init();
  printf("Hello, world!\r\n");
  /* USER CODE END 2 */

  /* Infinite loop */
  /* USER CODE BEGIN WHILE */
+  uint8_t rfid_id[4] = {0};
  while (1)
  {
-	  HAL_Delay(100);
-	  scan_keypad();
-	  scan_buttons();
+	  HAL_Delay(500);
+//	  scan_keypad();
+//	  scan_buttons();
 //	  printBinary(keypad_state);
-	  printf("s: %d\r\n", keypad_state);
-	  printf("r: %d\r\n", recv_cnt);
-	  printf("d: %d %d %d %d, %d %d %d %d\r\n", data[0], data[1], data[2], data[3], data[4], data[5], data[6], data[7]);
-	  HAL_I2C_Slave_Receive_IT(&hi2c1, (uint8_t*)&data, 8);
+//	  printf("s: %d\r\n", keypad_state);
+//	  printf("r: %d\r\n", recv_cnt);
+//	  printf("d: %d %d %d %d, %d %d %d %d\r\n", data[0], data[1], data[2], data[3], data[4], data[5], data[6], data[7]);
+//	  HAL_I2C_Slave_Receive_IT(&hi2c1, (uint8_t*)&data, 8);

+	  if(rc522_checkCard(rfid_id)) {
+		printf("0x%x 0x%x 0x%x 0x%x\r\n", rfid_id[0], rfid_id[1], rfid_id[2], rfid_id[3]);
+	  }

    /* USER CODE END WHILE */

@ -257,10 +263,10 @@ static void MX_SPI1_Init(void)
  hspi1.Instance = SPI1;
  hspi1.Init.Mode = SPI_MODE_MASTER;
  hspi1.Init.Direction = SPI_DIRECTION_2LINES;
-  hspi1.Init.DataSize = SPI_DATASIZE_4BIT;
+  hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
  hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
  hspi1.Init.CLKPhase = SPI_PHASE_1EDGE;
-  hspi1.Init.NSS = SPI_NSS_HARD_OUTPUT;
+  hspi1.Init.NSS = SPI_NSS_SOFT;
  hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
  hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
  hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
@ -344,6 +350,9 @@ static void MX_GPIO_Init(void)
  __HAL_RCC_GPIOC_CLK_ENABLE();
  __HAL_RCC_GPIOD_CLK_ENABLE();

+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(RFID_CS_GPIO_Port, RFID_CS_Pin, GPIO_PIN_RESET);
+
  /*Configure GPIO pin Output Level */
  HAL_GPIO_WritePin(RFID_RST_GPIO_Port, RFID_RST_Pin, GPIO_PIN_RESET);

@ -364,6 +373,13 @@ static void MX_GPIO_Init(void)
  GPIO_InitStruct.Alternate = GPIO_AF7_EVENTOUT;
  HAL_GPIO_Init(INT_GPIO_Port, &GPIO_InitStruct);

+  /*Configure GPIO pin : RFID_CS_Pin */
+  GPIO_InitStruct.Pin = RFID_CS_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  HAL_GPIO_Init(RFID_CS_GPIO_Port, &GPIO_InitStruct);
+
  /*Configure GPIO pins : HALL_Pin CLOSE_Pin */
  GPIO_InitStruct.Pin = HALL_Pin|CLOSE_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
--- a/Core/Src/stm32g0xx_hal_msp.c
+++ b/Core/Src/stm32g0xx_hal_msp.c
@ -182,12 +182,11 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)

    __HAL_RCC_GPIOA_CLK_ENABLE();
    /**SPI1 GPIO Configuration
-    PA4     ------> SPI1_NSS
    PA5     ------> SPI1_SCK
    PA6     ------> SPI1_MISO
    PA7     ------> SPI1_MOSI
    */
-    GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
+    GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
    GPIO_InitStruct.Pull = GPIO_NOPULL;
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
@ -218,12 +217,11 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
    __HAL_RCC_SPI1_CLK_DISABLE();

    /**SPI1 GPIO Configuration
-    PA4     ------> SPI1_NSS
    PA5     ------> SPI1_SCK
    PA6     ------> SPI1_MISO
    PA7     ------> SPI1_MOSI
    */
-    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);
+    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7);

  /* USER CODE BEGIN SPI1_MspDeInit 1 */

--- a/Debug/Core/Src/RFID.cyclo
+++ b/Debug/Core/Src/RFID.cyclo
@ -0,0 +1,15 @@
+../Core/Src/RFID.c:26:6:spi_cs_rfid_write	1
+../Core/Src/RFID.c:31:9:rc522_regRead8	1
+../Core/Src/RFID.c:48:6:rc522_regWrite8	1
+../Core/Src/RFID.c:60:6:rc522_setBit	1
+../Core/Src/RFID.c:68:6:rc522_clearBit	1
+../Core/Src/RFID.c:76:6:rc522_reset	1
+../Core/Src/RFID.c:84:6:rc522_antennaON	2
+../Core/Src/RFID.c:97:6:rc522_checkCard	2
+../Core/Src/RFID.c:115:6:rc522_request	3
+../Core/Src/RFID.c:131:6:rc522_toCard	18
+../Core/Src/RFID.c:232:6:rc522_antiColl	4
+../Core/Src/RFID.c:263:6:rc522_halt	1
+../Core/Src/RFID.c:275:6:rc522_calculateCRC	4
+../Core/Src/RFID.c:304:6:rc522_compareIds	3
+../Core/Src/RFID.c:317:6:rc522_init	1
--- a/Debug/Core/Src/RFID.d
+++ b/Debug/Core/Src/RFID.d
@ -0,0 +1,69 @@
+Core/Src/RFID.o: ../Core/Src/RFID.c ../Core/Inc/RFID.h ../Core/Inc/main.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h \
+ ../Core/Inc/stm32g0xx_hal_conf.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_def.h \
+ ../Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g0xx.h \
+ ../Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g070xx.h \
+ ../Drivers/CMSIS/Include/core_cm0plus.h \
+ ../Drivers/CMSIS/Include/cmsis_version.h \
+ ../Drivers/CMSIS/Include/cmsis_compiler.h \
+ ../Drivers/CMSIS/Include/cmsis_gcc.h \
+ ../Drivers/CMSIS/Include/mpu_armv7.h \
+ ../Drivers/CMSIS/Device/ST/STM32G0xx/Include/system_stm32g0xx.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rcc.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc_ex.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio_ex.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dma.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dmamux.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma_ex.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cortex.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_exti.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ex.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c_ex.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr_ex.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi_ex.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart.h \
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h
+../Core/Inc/RFID.h:
+../Core/Inc/main.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h:
+../Core/Inc/stm32g0xx_hal_conf.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_def.h:
+../Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g0xx.h:
+../Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g070xx.h:
+../Drivers/CMSIS/Include/core_cm0plus.h:
+../Drivers/CMSIS/Include/cmsis_version.h:
+../Drivers/CMSIS/Include/cmsis_compiler.h:
+../Drivers/CMSIS/Include/cmsis_gcc.h:
+../Drivers/CMSIS/Include/mpu_armv7.h:
+../Drivers/CMSIS/Device/ST/STM32G0xx/Include/system_stm32g0xx.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rcc.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc_ex.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio_ex.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dma.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_dmamux.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma_ex.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cortex.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_exti.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ex.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_i2c_ex.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr_ex.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi_ex.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart.h:
+../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h:
--- a/Debug/Core/Src/RFID.o
+++ b/Debug/Core/Src/RFID.o
--- a/Debug/Core/Src/RFID.su
+++ b/Debug/Core/Src/RFID.su
@ -0,0 +1,15 @@
+../Core/Src/RFID.c:26:6:spi_cs_rfid_write	16	static
+../Core/Src/RFID.c:31:9:rc522_regRead8	32	static
+../Core/Src/RFID.c:48:6:rc522_regWrite8	24	static
+../Core/Src/RFID.c:60:6:rc522_setBit	16	static
+../Core/Src/RFID.c:68:6:rc522_clearBit	16	static
+../Core/Src/RFID.c:76:6:rc522_reset	8	static
+../Core/Src/RFID.c:84:6:rc522_antennaON	24	static
+../Core/Src/RFID.c:97:6:rc522_checkCard	32	static
+../Core/Src/RFID.c:115:6:rc522_request	48	static
+../Core/Src/RFID.c:131:6:rc522_toCard	48	static
+../Core/Src/RFID.c:232:6:rc522_antiColl	40	static
+../Core/Src/RFID.c:263:6:rc522_halt	24	static
+../Core/Src/RFID.c:275:6:rc522_calculateCRC	40	static
+../Core/Src/RFID.c:304:6:rc522_compareIds	24	static
+../Core/Src/RFID.c:317:6:rc522_init	8	static
--- a/Debug/Core/Src/main.cyclo
+++ b/Debug/Core/Src/main.cyclo
@ -1,15 +1,15 @@
-../Core/Src/main.c:81:6:printBinary	2
-../Core/Src/main.c:100:5:main	1
-../Core/Src/main.c:159:6:SystemClock_Config	3
-../Core/Src/main.c:198:13:MX_I2C1_Init	4
-../Core/Src/main.c:246:13:MX_SPI1_Init	2
-../Core/Src/main.c:286:13:MX_USART2_UART_Init	5
-../Core/Src/main.c:334:13:MX_GPIO_Init	1
-../Core/Src/main.c:436:1:__io_putchar	1
-../Core/Src/main.c:446:6:HAL_I2C_SlaveRxCpltCallback	1
-../Core/Src/main.c:451:6:init_keypad	1
-../Core/Src/main.c:459:6:init_buttons	1
-../Core/Src/main.c:466:6:scan_keypad	16
-../Core/Src/main.c:500:6:scan_buttons	12
-../Core/Src/main.c:527:6:send_iterupt	1
-../Core/Src/main.c:537:6:Error_Handler	1
+../Core/Src/main.c:82:6:printBinary	2
+../Core/Src/main.c:101:5:main	2
+../Core/Src/main.c:165:6:SystemClock_Config	3
+../Core/Src/main.c:204:13:MX_I2C1_Init	4
+../Core/Src/main.c:252:13:MX_SPI1_Init	2
+../Core/Src/main.c:292:13:MX_USART2_UART_Init	5
+../Core/Src/main.c:340:13:MX_GPIO_Init	1
+../Core/Src/main.c:452:1:__io_putchar	1
+../Core/Src/main.c:462:6:HAL_I2C_SlaveRxCpltCallback	1
+../Core/Src/main.c:467:6:init_keypad	1
+../Core/Src/main.c:475:6:init_buttons	1
+../Core/Src/main.c:482:6:scan_keypad	16
+../Core/Src/main.c:516:6:scan_buttons	12
+../Core/Src/main.c:543:6:send_iterupt	1
+../Core/Src/main.c:553:6:Error_Handler	1
--- a/Debug/Core/Src/main.d
+++ b/Debug/Core/Src/main.d
@ -31,7 +31,8 @@ Core/Src/main.o: ../Core/Src/main.c ../Core/Inc/main.h \
 ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi.h \
 ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi_ex.h \
 ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart.h \
- ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h
+ ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h \
+ ../Core/Inc/RFID.h
 ../Core/Inc/main.h:
 ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h:
 ../Core/Inc/stm32g0xx_hal_conf.h:
@ -66,3 +67,4 @@ Core/Src/main.o: ../Core/Src/main.c ../Core/Inc/main.h \
 ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi_ex.h:
 ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart.h:
 ../Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h:
+../Core/Inc/RFID.h:
--- a/Debug/Core/Src/main.o
+++ b/Debug/Core/Src/main.o
--- a/Debug/Core/Src/main.su
+++ b/Debug/Core/Src/main.su
@ -1,15 +1,15 @@
-../Core/Src/main.c:81:6:printBinary	24	static
-../Core/Src/main.c:100:5:main	48	static
-../Core/Src/main.c:159:6:SystemClock_Config	88	static
-../Core/Src/main.c:198:13:MX_I2C1_Init	8	static
-../Core/Src/main.c:246:13:MX_SPI1_Init	8	static
-../Core/Src/main.c:286:13:MX_USART2_UART_Init	8	static
-../Core/Src/main.c:334:13:MX_GPIO_Init	56	static
-../Core/Src/main.c:436:1:__io_putchar	16	static
-../Core/Src/main.c:446:6:HAL_I2C_SlaveRxCpltCallback	16	static
-../Core/Src/main.c:451:6:init_keypad	8	static
-../Core/Src/main.c:459:6:init_buttons	8	static
-../Core/Src/main.c:466:6:scan_keypad	8	static
-../Core/Src/main.c:500:6:scan_buttons	8	static
-../Core/Src/main.c:527:6:send_iterupt	8	static
-../Core/Src/main.c:537:6:Error_Handler	8	static,ignoring_inline_asm
+../Core/Src/main.c:82:6:printBinary	24	static
+../Core/Src/main.c:101:5:main	32	static
+../Core/Src/main.c:165:6:SystemClock_Config	88	static
+../Core/Src/main.c:204:13:MX_I2C1_Init	8	static
+../Core/Src/main.c:252:13:MX_SPI1_Init	8	static
+../Core/Src/main.c:292:13:MX_USART2_UART_Init	8	static
+../Core/Src/main.c:340:13:MX_GPIO_Init	56	static
+../Core/Src/main.c:452:1:__io_putchar	16	static
+../Core/Src/main.c:462:6:HAL_I2C_SlaveRxCpltCallback	16	static
+../Core/Src/main.c:467:6:init_keypad	8	static
+../Core/Src/main.c:475:6:init_buttons	8	static
+../Core/Src/main.c:482:6:scan_keypad	8	static
+../Core/Src/main.c:516:6:scan_buttons	8	static
+../Core/Src/main.c:543:6:send_iterupt	8	static
+../Core/Src/main.c:553:6:Error_Handler	8	static,ignoring_inline_asm
--- a/Debug/Core/Src/stm32g0xx_hal_msp.cyclo
+++ b/Debug/Core/Src/stm32g0xx_hal_msp.cyclo
@ -2,6 +2,6 @@
 ../Core/Src/stm32g0xx_hal_msp.c:90:6:HAL_I2C_MspInit	3
 ../Core/Src/stm32g0xx_hal_msp.c:139:6:HAL_I2C_MspDeInit	2
 ../Core/Src/stm32g0xx_hal_msp.c:172:6:HAL_SPI_MspInit	2
-../Core/Src/stm32g0xx_hal_msp.c:210:6:HAL_SPI_MspDeInit	2
-../Core/Src/stm32g0xx_hal_msp.c:241:6:HAL_UART_MspInit	3
-../Core/Src/stm32g0xx_hal_msp.c:288:6:HAL_UART_MspDeInit	2
+../Core/Src/stm32g0xx_hal_msp.c:209:6:HAL_SPI_MspDeInit	2
+../Core/Src/stm32g0xx_hal_msp.c:239:6:HAL_UART_MspInit	3
+../Core/Src/stm32g0xx_hal_msp.c:286:6:HAL_UART_MspDeInit	2
--- a/Debug/Core/Src/stm32g0xx_hal_msp.o
+++ b/Debug/Core/Src/stm32g0xx_hal_msp.o
--- a/Debug/Core/Src/stm32g0xx_hal_msp.su
+++ b/Debug/Core/Src/stm32g0xx_hal_msp.su
@ -2,6 +2,6 @@
 ../Core/Src/stm32g0xx_hal_msp.c:90:6:HAL_I2C_MspInit	80	static
 ../Core/Src/stm32g0xx_hal_msp.c:139:6:HAL_I2C_MspDeInit	16	static
 ../Core/Src/stm32g0xx_hal_msp.c:172:6:HAL_SPI_MspInit	56	static
-../Core/Src/stm32g0xx_hal_msp.c:210:6:HAL_SPI_MspDeInit	16	static
-../Core/Src/stm32g0xx_hal_msp.c:241:6:HAL_UART_MspInit	80	static
-../Core/Src/stm32g0xx_hal_msp.c:288:6:HAL_UART_MspDeInit	16	static
+../Core/Src/stm32g0xx_hal_msp.c:209:6:HAL_SPI_MspDeInit	16	static
+../Core/Src/stm32g0xx_hal_msp.c:239:6:HAL_UART_MspInit	80	static
+../Core/Src/stm32g0xx_hal_msp.c:286:6:HAL_UART_MspDeInit	16	static
--- a/Debug/Core/Src/stm32g0xx_it.o
+++ b/Debug/Core/Src/stm32g0xx_it.o
--- a/Debug/Core/Src/subdir.mk
+++ b/Debug/Core/Src/subdir.mk
@ -5,6 +5,7 @@

 # Add inputs and outputs from these tool invocations to the build variables 
 C_SRCS += \
+../Core/Src/RFID.c \
 ../Core/Src/main.c \
 ../Core/Src/stm32g0xx_hal_msp.c \
 ../Core/Src/stm32g0xx_it.c \
@ -13,6 +14,7 @@ C_SRCS += \
 ../Core/Src/system_stm32g0xx.c 

 C_DEPS += \
+./Core/Src/RFID.d \
 ./Core/Src/main.d \
 ./Core/Src/stm32g0xx_hal_msp.d \
 ./Core/Src/stm32g0xx_it.d \
@ -21,6 +23,7 @@ C_DEPS += \
 ./Core/Src/system_stm32g0xx.d 

 OBJS += \
+./Core/Src/RFID.o \
 ./Core/Src/main.o \
 ./Core/Src/stm32g0xx_hal_msp.o \
 ./Core/Src/stm32g0xx_it.o \
@ -36,7 +39,7 @@ Core/Src/%.o Core/Src/%.su Core/Src/%.cyclo: ../Core/Src/%.c Core/Src/subdir.mk
 clean: clean-Core-2f-Src

 clean-Core-2f-Src:
-	-$(RM) ./Core/Src/main.cyclo ./Core/Src/main.d ./Core/Src/main.o ./Core/Src/main.su ./Core/Src/stm32g0xx_hal_msp.cyclo ./Core/Src/stm32g0xx_hal_msp.d ./Core/Src/stm32g0xx_hal_msp.o ./Core/Src/stm32g0xx_hal_msp.su ./Core/Src/stm32g0xx_it.cyclo ./Core/Src/stm32g0xx_it.d ./Core/Src/stm32g0xx_it.o ./Core/Src/stm32g0xx_it.su ./Core/Src/syscalls.cyclo ./Core/Src/syscalls.d ./Core/Src/syscalls.o ./Core/Src/syscalls.su ./Core/Src/sysmem.cyclo ./Core/Src/sysmem.d ./Core/Src/sysmem.o ./Core/Src/sysmem.su ./Core/Src/system_stm32g0xx.cyclo ./Core/Src/system_stm32g0xx.d ./Core/Src/system_stm32g0xx.o ./Core/Src/system_stm32g0xx.su
+	-$(RM) ./Core/Src/RFID.cyclo ./Core/Src/RFID.d ./Core/Src/RFID.o ./Core/Src/RFID.su ./Core/Src/main.cyclo ./Core/Src/main.d ./Core/Src/main.o ./Core/Src/main.su ./Core/Src/stm32g0xx_hal_msp.cyclo ./Core/Src/stm32g0xx_hal_msp.d ./Core/Src/stm32g0xx_hal_msp.o ./Core/Src/stm32g0xx_hal_msp.su ./Core/Src/stm32g0xx_it.cyclo ./Core/Src/stm32g0xx_it.d ./Core/Src/stm32g0xx_it.o ./Core/Src/stm32g0xx_it.su ./Core/Src/syscalls.cyclo ./Core/Src/syscalls.d ./Core/Src/syscalls.o ./Core/Src/syscalls.su ./Core/Src/sysmem.cyclo ./Core/Src/sysmem.d ./Core/Src/sysmem.o ./Core/Src/sysmem.su ./Core/Src/system_stm32g0xx.cyclo ./Core/Src/system_stm32g0xx.d ./Core/Src/system_stm32g0xx.o ./Core/Src/system_stm32g0xx.su

 .PHONY: clean-Core-2f-Src

--- a/Debug/blk_box_bc.elf
+++ b/Debug/blk_box_bc.elf
--- a/Debug/blk_box_bc.list
+++ b/Debug/blk_box_bc.list
--- a/Debug/blk_box_bc.map
+++ b/Debug/blk_box_bc.map
--- a/Debug/objects.list
+++ b/Debug/objects.list
@ -1,3 +1,4 @@
+"./Core/Src/RFID.o"
 "./Core/Src/main.o"
 "./Core/Src/stm32g0xx_hal_msp.o"
 "./Core/Src/stm32g0xx_it.o"
--- a/Debug.launch
+++ b/Debug.launch
@ -78,5 +78,6 @@
    <listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
        <listEntry value="4"/>
    </listAttribute>
+    <stringAttribute key="org.eclipse.dsf.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;memoryBlockExpressionList context=&quot;reserved-for-future-use&quot;/&gt;"/>
    <stringAttribute key="process_factory_id" value="com.st.stm32cube.ide.mcu.debug.launch.HardwareDebugProcessFactory"/>
 </launchConfiguration>
--- a/blk_box_bc.ioc
+++ b/blk_box_bc.ioc
@ -104,9 +104,10 @@ PA2.Signal=USART2_TX
 PA3.Locked=true
 PA3.Mode=Asynchronous
 PA3.Signal=USART2_RX
+PA4.GPIOParameters=GPIO_Label
+PA4.GPIO_Label=RFID_CS
 PA4.Locked=true
-PA4.Mode=NSS_Signal_Hard_Output
-PA4.Signal=SPI1_NSS
+PA4.Signal=GPIO_Output
 PA5.Locked=true
 PA5.Mode=Full_Duplex_Master
 PA5.Signal=SPI1_SCK
@ -292,10 +293,10 @@ RCC.USART2Freq_Value=8000000
 RCC.VCOInputFreq_Value=8000000
 RCC.VCOOutputFreq_Value=128000000
 SPI1.CalculateBaudRate=4.0 MBits/s
+SPI1.DataSize=SPI_DATASIZE_8BIT
 SPI1.Direction=SPI_DIRECTION_2LINES
-SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,VirtualNSS
+SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,DataSize
 SPI1.Mode=SPI_MODE_MASTER
-SPI1.VirtualNSS=VM_NSSHARD
 SPI1.VirtualType=VM_MASTER
 USART2.IPParameters=VirtualMode-Asynchronous
 USART2.VirtualMode-Asynchronous=VM_ASYNC